A more likely reason JM is litigation from people getting caught in exposed pulleys and belt.Jovial_Monk said:The trouble with the motor and pully method, and likely the reason BC recommends using a drill, is that if your malt contains a stone the motor will keep going, and the stone will damage your rollers.
If you do go ahead with the motor & pulley method make sure you use quality malts only.
Jovial Monk
Me said:----- Original Message -----
From: Nick
To: [email protected]
Sent: Tuesday, January 25, 2005 6:03 PM
Subject: mills
I'm looking at making a mill purchase soon and am exploring all options prior to purchase. At the moment, The Barley Crusher is looking like what I'm going to buy. I've read about your mills on homebrew forums and am interested in finding out a bit of information as I've not settled on a single mill. The fact that the Valley Mill can only be purchased from the manufacturer means the cost is prohibitive to get into Australia. I like the look of your mills.
I'm looking at spending the same or less than what the BC can be bought for shipped to Melbourne Australia, USD165. I'm planning on hand cranking the grains, but may in the future motorise it with either a drill or pulley system, but to be honest, hand cranking for a few minutes shouldn't be too much of a strain.
I'm having a little difficulty deciphering the differences in all the models you have as well as the pros/cons of each. I know I don't want to have to pull the unit apart to set the gap, I'd prefer to have a knob/dial/lever to allow "on the fly" gap setting.
The other question I have is with warranty. what sort of warranty do your mills come with?
Sorry for all the questions, but I only want to buy one mill in my brewing career.
Fred said:Nick,
I think your best deal would be to get our knob adjustable 2A mill, and build yourself a hopper, and base. If you don't have a drill, or plan to buy one then you should add our crank handle. The base we sell is a simple square cutout of 3/4" plywood that you can source locally. The hopper is just a large plain metal galvanized tractor funnel that you can pick up at a hardware store. Past that, all you need is access to some tools to cut the wood out, and fashion the hopper of your choice. I always recommend my international customers build their own base and hopper because it seems silly to send a piece of plywood half way around the world. If you really don't want to, or can't build the base/hopper system, just pick up the CGM-BCC, or BCCh with the handle. (this setup is on the front page of our web site)
Our mills are really simple. The 2S (S=Settable) is the one you have to take apart to change the gap on. (you already ruled it out). The 2A (A=Adjustable) is the knob adjustable mill. We have made a change in our new knobs for the A series of mills and are making them out of stainless steel instead of aluminum. The design is very similar to the appearence of the knobs on the D line of mills but without the roll pin. To adjust the A series mill, all you do is loosen the set screws on each knob, turn the knob the correct amount to get the gap you want, and then tighten the setscrews. The trick here is to measure the gap settings you want to use, and mark the frames, and knobs so you can go back to the settings you want to use. The D series of mills (D=Detent) have setscrews like the A mills to hold the gap setting, but also have detents in the knobs that click into discreet spots. If you look at the picture on our web site, you can see the small davits machined in the knob. There is a spring loaded ball bearing that falls into each divot to give the click, and the detent settings. This setup allows you to easily go back to any of the discreet gap settings by just turning the knobs back to that click. It gives you less possible gap settings with the ease of going back to any one very easily, and quickly.
Our warrantee is really simple. If you aren't happy with the mill, you just need to return it, and we will refund the full purchase price of the mill. We can't refund shipping because we have no way to recover those costs. I have always hated to deal with a company that doesn't seem to care weather or not I'm happy with my purchase, and Its a total buzz kill to spend your hard earned $$ to be disappointed. We provide as much support as possible to resolve any problems, and strive to achieve 100% customer satisfaction. We will reknurl rollers for free as long as you have your mill. All you need to do is send them to us, and pay for return postage. I have had only a few returns, and they were from folks that just never got around to using the mill, or obviously abused it, and then traded it in for another.
Some differences between our mill and the barley crusher. Our rollers are larger 1.5" instead of 1.25". Our mills have axels on the ends of both of the rollers, and the crusher has holes in the ends of the idler roller for their adjustment knob to stick into. Our handle is 10 times as beefy as the crusher's. Our base, and hopper systems are totally different. The barley crusher is a decent mill, but we feel ours is better. Ours cost a little more but we feel they're built better. I haven't dealt with Barley crusher, nor have I ever even spoken to them. Our mills are made one at a time by hand right here in Atlanta GA by my machinist partner.
So....to get a 2A, with handle to Australia is going to cost $49 via USPS Global priority mail with delivery in 3-5 days after shipment.
That's CGM-2A= $99, CGM-HNDL=$20, plus shipping= $49 = total of $168
if you want the whole setup with handle that's the CGM-BCCh = $144, plus shipping of $64 = $208 This is with shipping via Airmail Parcel post with delivery in 4-10 days. Global Priority is $67 for 3-5 day. All shipping prices include insurance just in case something happens.
If you are anywhere close to Melbourne, I am going to be sending several mills to a hombre club there. You could sample our workmanship. Its going to be a while before they get there though, as they opted for surface post (4-6 weeks delivery time).
We can take credit cards through PayPal, or international $$ orders.
If you need any further information, or have any more questions, let me know.
Thanks,
~~fred francis
CrankandStein.com
Doc said:OK, this is my research so far.GMK said:I want to do this also - can post how you are doing it..
ie motor size - rpm wattage
pulley sizes and especially what RPM u think the mill should run at....
The Valley Mill should not be run over 300rpm as recommended by the manufacturer. I'm sure the BC will be similar.
You want to look for a 1/3 to 1/2 HP AC motor with the RPM around 1400. Any more than this and you will have to use multiple pulleys to gear it down.
Checkout thislink on HBD and this one in Oz for some good info.
I'll post pics etc when I get mine done.
My motor should be here end of the week (eBay), and I'm trying to find a good Oz online supplier of pulleys and v-belts now. Not having much success with that so far though.
Doc
[post="42601"][/post]
Doc said:Can anyone give me a great lead on a friendly place in Sydney that I can rock up to and get the pulleys and belts I need to motorise my valley mill ? Please please please.
Doc
[post="91287"][/post]
Batz said:Doc,
I too have a Valley Mill (you know that)
Ok what you need is the motor gearbox assembly from an old Hoover Twin Tub washer , it will have the pulley already.
Just get a pulley to suit your Valley Mill , Coventrys or someplace will have one , take in the mill and show them !
Try a washer repairer for the Twin Tub
Good luck
Batz
[post="91296"][/post]
Enter your email address to join: