reVoxAHB
Well-Known Member
- Joined
- 3/3/07
- Messages
- 1,112
- Reaction score
- 17
I'm considering the purchase of a 6 gauge (Taprite) regulator/manifold for use in dispensing.
The manifold will allow for individual pressure control of each keg, rather than pressure stabalisation common to gas manifolds such as this:
The seller has taken the manifold apart, cleaned, inspected and tested to 100% working, no leaks. The faces on the gauges have a little surface rust (& comes with caps) but otherwise, cosmetically fine. The manifold will be used secondary, behind my Micromatic reg which is attached to the C02 cylinder.
I can do this for $140AUD landed. Pics
Thoughts? Comments?
Thanks for your time,
reVox
The manifold will allow for individual pressure control of each keg, rather than pressure stabalisation common to gas manifolds such as this:
The seller has taken the manifold apart, cleaned, inspected and tested to 100% working, no leaks. The faces on the gauges have a little surface rust (& comes with caps) but otherwise, cosmetically fine. The manifold will be used secondary, behind my Micromatic reg which is attached to the C02 cylinder.
I can do this for $140AUD landed. Pics
Thoughts? Comments?
Thanks for your time,
reVox