Upside down yeast

Australia & New Zealand Homebrewing Forum

Help Support Australia & New Zealand Homebrewing Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

livo

Well-Known Member
Joined
3/10/11
Messages
252
Reaction score
90
I've collected the yeast cake from a recent brew (US-05) in a sterile 2 litre glass flagon with the intention of washing. I've performed this process before, watched all the videos and read up a lot. I've never seen this before. I'm on the tablet entering this so I'll add photos later.

Usually when you add sterilised water to the yeast cake and collect it you will fairly quickly see the layers forming with the dark trub settling to the bottom, the lighter creamy yeast above and clearer liquid (water and residual beer) on top. If you refrigerate this it will become very clear layers with distinct lines. This did not happen for my most recent collection.

Instead, as the solids began to drop out of solution, I had the dark layer sandwiched between lighter creamy layers above and below. Now, yesterday after refrigeration, I have the distinct layers of separation but they are upside down. The bottom layer is light and creamy, the middle layer is darker and mottled with the clear liquid on top.

Anyone seen this before? Is the bottom layer the trub or the yeast?
 

Attachments

  • US-05 1 hour.JPG
    US-05 1 hour.JPG
    63.7 KB · Views: 34
  • US-05 Fridge.JPG
    US-05 Fridge.JPG
    54.7 KB · Views: 34
Last edited:
Update: I ignored my confusion about the lightness / darkness of the layers and assumed the trub to be on the bottom, as you'd expect, despite the colour. I have allowed this to warm and poured off the clear liquid, followed by collecting the next layer, assuming it to be yeast. After the first washing in boil sterilised water the separation has occurred as expected with the darker stuff falling to the bottom. I've repeated the process and collected 4 small jars of very clean yeast which has been refrigerated overnight. I expect to have 4 nice jars of reusable US-05 this morning.

Maybe this isn't something new but I've never seen the bottom layer being creamy white and the usable yeast dark before.
 

Attachments

  • US-05 2nd wash.JPG
    US-05 2nd wash.JPG
    149.8 KB · Views: 27
  • US-051st wash.JPG
    US-051st wash.JPG
    51.2 KB · Views: 26
Any ideas on how you would estimate the cell count in these collected jars? I estimate there to be approximately 20cc (ml) of yeast settled to the bottom of each jar. As this is the collected amount from a single fermentation and some has been discarded in the process, how much would you pitch into another brew?
 

Attachments

  • US-05 20cc.JPG
    US-05 20cc.JPG
    51.6 KB · Views: 14
  • US-05 jars.JPG
    US-05 jars.JPG
    167.8 KB · Views: 15
You can’t keep expecting simple answers to complex problems.

Typically yeast slurry is thought to be around 50% yeast balance being trub.
A fair rule of thumb would be 1.2Billion cells/mL, that is in a healthy fresh slurry, how long you keep it before use and what that will do to the population, its vitality and the number of mutations that can be expected is way more complex.

In a brewery the typical pitches are way bigger than most home brewers would consider, 0.5million cells/mL/oP would be a minimum.
Say you were pitching into 23L of 1.050 (12.5oP) wort at 0.5million cells/mL/oP you would need 23000*0.5EXP6*12.5=143,750,000,000 cells at 1.2Billion/ml (1.2EXP9) you need 119.79mL Ok call it 1.20mL.
Fair to say if you pitched all you have it would be an underpitch.

Making a decent starter, pitching one of your jars and making sure it’s well aerated and you might get the starter up to 80-100Million cells/mL Leave it to you to work out how big your starter should be. If I tell you I suspect you won’t believe the answer.

On the Catalyst episode linked earlier, did you notice dry yeast being sprinkled directly into the fermenter? Un-hydrated, not a starter in sight, I suspect you would be surprised at how many small breweries do exactly that.
Yeast is the wrong place to try and save money on a brew.
Mark
 
Thanks again Mark.

I'm not expecting anything really. I just ask questions that occur to me as something I don't know. Any information freely given is well appreciated and you have once again provided as good an answer as one could hope for. I've pitched a new brew on a full yeast load from the previous fermentation before without removing any trub. I've washed yeast before and just used the whole lot. I was just wondering if it required all and apparently it does because I have maybe 80 ml and I'd need 120.

I was just interested in the maths and 1.2X10^9 /ml is a good starting point to at least see what I might have collected and then compare it to what might be in a packet. Whether or not I start playing with starters is undecided at this point although I have just treated myself to a 6 pack of Coopers Original Pale Ale (with birthday discount) and I'm about to do the harvesting as shown on their video. Again, just for the heck of it, but I intend to use it.

I'm not trying to save money. I'm a retired old (nearly) bloke and I like fluffing about with stuff. Playing with yeast is just something to do in the shed. If it succeeds then good. If I start getting dodgy beer, it won't last long.
 
On the Catalyst episode linked earlier, did you notice dry yeast being sprinkled directly into the fermenter? Un-hydrated, not a starter in sight, I suspect you would be surprised at how many small breweries do exactly that.

Thanks Mark

That was one thing that stood out for me. I expected that they would be using a harvested liquid. The idea of growing a starter sounds great but there is a bit of work that goes into it. Maybe when I come across that incredible drop with some specialist yeast, or I retire in a couple of years and have the time, like Livo, to experiment. In the meantime I'm pretty happy with yeast from the LHBS.

Livo

Let us know how it goes.

Cheers n Beers
Jolls
 
I'm in the middle of reading an article on yeast propagation and maintenance by MB Raines on The Maltose Falcons website. Fascinating stuff. The interesting thing is under-pitching is very common in home-brew. An airlock method starter would need to be 50% of the final wort volume. I think this is what you were saying mhb. Those little packets of dried yeast are demonstrably inadequate and apparently put a lot of stress on the yeast, by forcing reproduction instead of fermentation. It appears we are lucky if we get a good beer with k&k approach.
 
Following on from my posts about high FG and MHB's helpful advice (again) about under-pitching, I like to harvest yeast. Light coloured beer is easy. When I finish taking the beer out of the FV into my priming container I add about 1 litre of distilled water into the FV, swirl it all around and tip it into a 2200 ml tall glass jar and lid it. After about an hour or 2 there are 2 distinct layers (usually) and I then use a sterilised syphon to remove the top clean yeast into a 1 litre jar which I then refrigerate until later use.

Following the same procedure yesterday with old beer was a bit confusing. The following photograph shows 6 distinct layers, 5 of which are yeast, and the top is cleared liquid (water and beer). I was a bit confused about which stuff to actually collect, so I just put the whole lot in the fridge until I try to find out which is which. Normally, I would collect the top light coloured layer leaving the dark layer on the bottom. This is all different.

Old Beer Yeast.jpg
 
Flocculation is the tendency of yeast cells to aggregate together, forming a multicellular mass and sedimenting rapidly from the suspended medium or rising to the surface. Yeast flocculation is a complex phenomenon occurring in brewer’s yeast under various conditions near the end of the fermentation process.

Yeasts all behave differently (strain dependant) at the end of fermentation yeast cells clump. Bigger clumps sink faster than do small clumps faster again than single yeast cells.

Point is that some of the layers you are seeing are probably yeast clumps sorted by size.
If you are using well made kits and malt extract and aren’t adding a shed load of hops you probably have a lot less "Trub" than an all grain brewer will.
Especially those doing short boils (dumb idea) or using hops by the truck load.
Given where you are at, I would probably use all the sediment (yeast). The amount of trub in your pitch will be pretty insignificant in a 23L brew.
Mark
 
Ok. Thanks yet again Mark. That's also good to know. I've done brews before where I just put a new one on the whole lot, but I've been diligently washing, separating and refrigerating only the top "clean" layer, which gives me plenty anyway. Oh well, you can't believe everything you see on YouTube I guess. I was just fascinated with the stratification of this one. I do notice the difference in early vigour when you use the reclaimed yeast when compared to the little packets you get with the kits. First off it doesn't need to rehydrate and there is a lot more of it. Tip it in and off she goes!!
 
Back
Top