Mytton Rodd keg

[loco88]

Perhaps tell me what I'm looking at too. I semi-accidentally bought this along with a couple of other things, it was blurry in the background. I think I've got a Mytton Rodd keg missing a PRV and a liquid post, but I don't really know much about them so I don't know what I need to do to get this one going. I assume a ball lock post won't fit straight on it?

I'm replacing the O-ring, what else should I consider?

 

[MartinOC]

You'll obviously need the liquid post & PRV. Last time I priced them, a replacement post runs at about $35

I'd recommend replacing the washers under both posts & the rubber sleeve that the dip-tube passes through & also replacing the internal rubbers in the gas post (it's a bit fiddly, so PM me if you want some tips on the easy way of doing it).

 

[Mardoo]

If you don't have a lid, a post, or a prv it's going to be pretty pricey to build back up. They're fantastic kegs though. I'm in FTG and actually have one I need to rebuild. I'm happy to run you through it.

This is one of the most solid sources for spare Mytton Rodd parts.

 

[loco88]

Did not expect them to be that expensive, the fittings cost more than the keg. Damn. I do have a converted 50L keg that looks to use the same fittings & lid, perhaps I'll just swap as the needs arise. Or maybe get rid of one, I guess. Let me know if you want a 50L to double your fun Mardoo

 

[Mardoo]

Already have 6, assuming you mean the large Mytton Rodd ones They make excellent pressurised fermenters.

 

[620rossco]

Pity its in Vic. I have two 50s but could use another one.

 

[Digga]

Not hijacking a thread just trying to save creating a new one.

I've managed to pickup a few of these.

So I believe that they are 45L (haven't filled to check volume) mytton rodd grosvenor kegs.

I know I need some dip tube and lid o rings as these on inspection have perished. I've done some Google searching and have found the link that mardoo posted and also this.
https://www.nationalhomebrew.com.au...pair-kit-rheem-mytton-rodd-reconditioning-kit

Now this one above states it's just for the smaller capacity kegs but would it be fine parts wise for my bigger ones? I think it should run all the same replaceable parts.

There is also.
http://www.ozbrew.com/default.asp?menuI=1&catI=2&catS=18&CatSs=63&country=Cuba&specs=true&zoom=271

Looks like the same kit just a few $ extra. Doesn't mention sizes.

Or could I just use corny keg lid o rings as they seem to fit / work (I have a few of these lying around) and just by 4 of these.
http://www.easykegging.com.au/shop/all-products/dip-tube-oring/

These guys don't seem to sell a seal kit and I'm kinda wanting to replace everything so I'm assured they are going to be top notch.

Keen to start some pressure fermenting and also having a large vessel for bulk distribution.

Any assistance will be greatly appreciated!

Cheers all.

 

[Mardoo]

Not sure the seals are different from a 19 or 23 litre to a 40. I've just used the same ones. The National Homebrew kits should do you fine.

 

[Digga]

Yeah sweet as thanks for the fast reply mardoo! I'll order up a couple tomorrow. Now just to get my spudding valve on!

 

[gezzanet]

I’ve just got a load of silicon o rings from oringsandmore.com to revamp 19l. Not sure if any of these will fit if you want to try them.

 

[Digga]

Yeah mate I'll definitely have a look at the types you picked up.
Cheers

 

[Haciluku]

Hi guys,

Wonder how much is a keg like this, and where can I find one in Melbourne?

 

[Digga]

https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.com.au/ulk/itm/302628962818

This is well dear in my eyes

 

[Haciluku]

https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.com.au/ulk/itm/302628962818

This is well dear in my eyes

Thanks! Quite expensive though.

 

[Digga]

@Haciluku

Home brew kegs,

http://www.gumtree.com.au/s-ad/enga...aign=socialbuttonsVIP&utm_content=app_android

Price: $150

These are OK, don't know it would be worth it after you add posts.

$75ea isn't bad but final price might be quite a bit more?

 

[Haciluku]

Thanks Digga.
Post is $36 each, and can be obtained from Easy Kegging. So it is about $155 for one keg.
Anyway, I am in Victoria so not near me.

 

[david effer]

You'll obviously need the liquid post & PRV. Last time I priced them, a replacement post runs at about $35

I'd recommend replacing the washers under both posts & the rubber sleeve that the dip-tube passes through & also replacing the internal rubbers in the gas post (it's a bit fiddly, so PM me if you want some tips on the easy way of doing it).

hi i have 3 of these racetrack lid kegs and had to replace the 2 posts as they were pin lock,,,i bought the 2 posts male thread from richmond home brewing in lismore nsw at a cost of 25 each plus a lid seal and o rings cost about 60 i can buy second hand kegs for about 60 the only saving grace was they are 23 litre and i got them for nicks

 

[dblunn]

They are a much better keg than the std cornie keg.

 

[MartinOC]

They are a much better keg than the std cornie keg.

MUCH MUCH better.

Yeah, you might pay a bit more initially for spares/refurbishment, but once you've got them, they're pretty-much bullet-proof.

Everything I have in the kegging-department is MR & won't touch Cornie stuff, as the current replacement parts are all mass-produced crap out of China that have poor machining tolerances & commensurate expected lifespan/reliability.

I'm keeping my MR kegs for as long as my arse points to the ground.

 

[Maheel]

i use 2 x 23l MR's as pressure fermenters

very solid kegs

as a dodgy post seal i have used co2 stem -> cylinder seal in the past...
they fitted just right