Multiple Kegs From The One Cylinder

Australia & New Zealand Homebrewing Forum

Help Support Australia & New Zealand Homebrewing Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Kenny does have a pic of the manifold on this site some place
maybe he could find the link

As far as the free stuff......thanks Kenny but I ready did not need the steak knifes :lol:

Batz
 
The steak knifes :lol:

GMK is going to kill me for this !!! :lol:

Batz :ph34r:
 
Batz said:
The steak knifes :lol:

GMK is going to kill me for this !!! :lol:

Batz :ph34r:
[post="50023"][/post]​

With another set of steak knives ?? :lol:

Doc
 
GMK

Do the GMK(tm) manifolds have valves to prevent back flow?

Cheers
Pedro

PS Can I have a discounted price as I don't need steak knives either?
 
the flow back valves are seperate....

Batz ordered one to go infront of the reg as i do i....

Pedro

U can save the freight - might do a special deal if u buy the cool room panels and stuff when i get my 2 door stainless fridge...
 
These guys have some good CO2 solutions for beer and not expensive. I haven't bought a manifold from them but I have a single gauge reg that works just fine.

http://www.vicfit.com/

Russell is also partial to a home brew so you might even be able to get the "homebrewers discount" if you turn up with some goods.
 
thanks for the link batz.i had trouble finding it.
free stuff hey....can i have a hand turned cutting board ken or the hand turned steak knife handles or the ;)

cheers
big d
 
You who know me would realize I am having a bit of fun here at GMK's expense

Really the manifolds are sh#t hot , I will take a better pic. than the one Ken posted tonight and put it on the board.

Cheers GMK well done

Batz
 
Here's a better pic. of the manifold and check value I got from GMK
 
what's the cost for a six keg manifold?

Without the steak knives, swiss army knife, cuddly toy......etc
 
110.00 plus freight of 10.00 - but the freight entitles u to upto 3kg weight of Gmkenterpsises stuff - eg disconects, taps, fridge ext, panel ext, etc....
 
die sudhausanlage said:
Hi everyone,

Can any one provide a picture of a multi keg gas manifold?

I want to run at least 5 kegs on gas.

Id like shut off valves so I can gas at a higher pressure eg 40 psi but have the other kegs turned off but still pour under their own pressure.

I could disconnect the gas on the kegs not being gassed but that would be too easy.

Im gearing up for OKTOBERFEST, we are hiring a marquee and having a Spitroast for about 40 people, AHB members are welcome to attend.

Cheers,

DS

Found this on www.morebeer.com it allows for different pressures to be used. Can any one get me one? GMK? (see Pic)View attachment 2107
[post="50013"][/post]​


OK - i have found this....

it is a gas board....recommended retail is 981.00 for the 4 gauge setup - i can sell one for 850.00....
 

Attachments

  • gas_board.jpg
    gas_board.jpg
    7.1 KB · Views: 79
Batz said:
Here's a better pic. of the manifold and check value I got from GMK
[post="50073"][/post]​

GMKenterprises can now source
these gas manifolds in seperate 3, 4 and 5 way versions aswell as the 6 way.
manifold.jpg
The price on the 3 way is 67.50.
Awaiting prices on the 4 and 5 way.

Let me know if u are interested.
 
Sorry I'm confuddled. A 3 way manifold runs one or 2 (two) kegs ?
I'm thinking about stepping up to a two keg system.
If a 3 way systems runs 3 kegs, can I block off the third outlet and still use the other two ?
 
3 way manifold runs 3 kegs.

There is a common in.
with 3 outs.
Each out has a ball valve and can be closed off.

Hope this stops the confuddling...
 
Yes it does :D
Might have to get one of them next pay cycle
Cheers
 
GMK said:
Batz said:
Here's a better pic. of the manifold and check value I got from GMK
[post="50073"][/post]​

GMKenterprises can now source
these gas manifolds in seperate 3, 4 and 5 way versions aswell as the 6 way.
View attachment 6919
The price on the 3 way is 67.50.
Awaiting prices on the 4 and 5 way.

Let me know if u are interested.
[post="123748"][/post]​


BEER PORN!


Ken,
As soon as I have decided on a 3 or 4 tap faunt, I will order accordingly.

Lovely work!

M
 
3 or 4 tap faunt,

Off topic follows: Is it FONT Fount or faunt?




:blink:
 
Back
Top