mr_tyreman
Well-Known Member
- Joined
- 27/2/09
- Messages
- 491
- Reaction score
- 8
Hey guys the new outdoor bar is being built against the shed wall, reason being is so i can have all the fridges/freezer behind the shed wall out of sight but while still having them close as possible to the bar.
I want to have a flooded font, but i have no idea how they work, without a good posibility of leaking...so i drew a picture to try and get some ideas from you guys.
i pump the glycol into the top pipe through a tube to the end of the font, and the glycol is circulatyed back towards the freezer and overflows back down into the freezer from the lower pipe.
all the beer lines are fed into the font through the top pipe as to not have to try and seal them all from the glycol.
could you please let me know if im on the right track or not...ta
P.S not really an accurate drawing as to pipe size or anything, but gives a rough idea of its workings
I want to have a flooded font, but i have no idea how they work, without a good posibility of leaking...so i drew a picture to try and get some ideas from you guys.
i pump the glycol into the top pipe through a tube to the end of the font, and the glycol is circulatyed back towards the freezer and overflows back down into the freezer from the lower pipe.
all the beer lines are fed into the font through the top pipe as to not have to try and seal them all from the glycol.
could you please let me know if im on the right track or not...ta
P.S not really an accurate drawing as to pipe size or anything, but gives a rough idea of its workings