Extraction fans - project

Australia & New Zealand Homebrewing Forum

Help Support Australia & New Zealand Homebrewing Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

fraser_john

Go Pies
Joined
17/1/06
Messages
2,477
Reaction score
374
Location
Victoria
There was a thread that was asking about using LPG inside. Before I converted my brewery to all electric, I was using LPG, inside. I built the extract fans show below and used a DC power supply off ebay and some cheap PWM controllers so I could control the speed and some 12v posts from Jaycar so I can even reverse them by changing polarity.

These things flow a hell of an amount of air when cranked up. In reality, I probably only needed one at full speed as I now run two at about 40% power whilst boiling and all steam is sucked right out.

ebay cooling fans
ebay power supply
ebay 12V PWM speed controller

DSCF4052s.JPG
DSCF4053s.JPG

Cheers
 
Those flexi-ducted bathroom fans are the go now

The can move heaps of air
 

Latest posts

Back
Top