Hi All,
I would hate for this to go to waste, so I thought I'd chuck it up here for in case someone is handy enough to work out the issue.
I have a 205L whirlpool chest freezer, fully setup and ready to go as a keezer (lots of time spent on this - I love it). It is currently working, but far from optimally. It recently decided to stop cooling, and won't go below about 5.5 degrees, but will weirdly hold between 5.5 and 7 degrees. It also still has an ice build up in one corner above the compressor hump. Ideally I would try and get this fixed, but I've called a few repair places that can't really diagnose the issue without coming out, and I'm not willing to pay for the call out in case that is fruitless. There is a chance it just requires more refrigerant, and has a slow leak.
A link to my build is here: The Keezer Build
I am open to just selling the freezer and collar to someone who is handy, or if someone wants the lot, I can include:
- 3 x Perlick 650SS Flow Control taps (perfect condition)
- 3 x 100mm long shanks with all nuts and JG push-in fittings for beer line (1 JG fitting brand new)
- 4-way gas manifold with 4 gas lines and 4 gas ball lock disconnects attached (to suit length of this exact freezer)
- 3 x beer lines (3.8m) with 3 liquid ball lock disconnects attached
Open to discussing selling off single bits and pieces too - I would keep the perlicks but I'm probably going to go bigger and will downgrade my taps in order to get more.
Lastly, if anyone is a fridgey in Brisbane and is willing to just come and have a look for a couple of beers, that would be much appreciated!
PRICE:
Freezer and collar only - $50
Parts only - $250
I would hate for this to go to waste, so I thought I'd chuck it up here for in case someone is handy enough to work out the issue.
I have a 205L whirlpool chest freezer, fully setup and ready to go as a keezer (lots of time spent on this - I love it). It is currently working, but far from optimally. It recently decided to stop cooling, and won't go below about 5.5 degrees, but will weirdly hold between 5.5 and 7 degrees. It also still has an ice build up in one corner above the compressor hump. Ideally I would try and get this fixed, but I've called a few repair places that can't really diagnose the issue without coming out, and I'm not willing to pay for the call out in case that is fruitless. There is a chance it just requires more refrigerant, and has a slow leak.
A link to my build is here: The Keezer Build
I am open to just selling the freezer and collar to someone who is handy, or if someone wants the lot, I can include:
- 3 x Perlick 650SS Flow Control taps (perfect condition)
- 3 x 100mm long shanks with all nuts and JG push-in fittings for beer line (1 JG fitting brand new)
- 4-way gas manifold with 4 gas lines and 4 gas ball lock disconnects attached (to suit length of this exact freezer)
- 3 x beer lines (3.8m) with 3 liquid ball lock disconnects attached
Open to discussing selling off single bits and pieces too - I would keep the perlicks but I'm probably going to go bigger and will downgrade my taps in order to get more.
Lastly, if anyone is a fridgey in Brisbane and is willing to just come and have a look for a couple of beers, that would be much appreciated!
PRICE:
Freezer and collar only - $50
Parts only - $250
