Adjustable Regs

Australia & New Zealand Homebrewing Forum

Help Support Australia & New Zealand Homebrewing Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

spog

The Odd Drop Brewery
Joined
10/4/04
Messages
3,416
Reaction score
989
g,day all.
i have picked an adjustable reg for my ag setup and on the label of the reg it say's do not use with a bbq or appliance rated at 2.75 kpa.
my ag rig will be fired with three 3 ring burners, can anyone tell me if this is or is not a problem.
or should i go for it and blow myself up :unsure: ..........cheers....spog.....
 
I ran my 3 ring burner on my "Swap" 8.5kgs gas bottle.
I know it is not much help, but I think you are safe.
 
Hey Spog

I just bought an adjustable reg for my 3 ring & it works great , they are talking about normal BBq burners & those wok burners. My supplier told me these regs were made for 3 ring type burners.

Lagers
 
Hey Spog

I just bought an adjustable reg for my 3 ring & it works great , they are talking about normal BBq burners & those wok burners. My supplier told me these regs were made for 3 ring type burners.

Lagers
bingo.....cheers............spog...........
 
make sure you wax/shave ya eyebrows b4 use :icon_cheers:
 
I use a similar sounding reg to run 2 x 4 ring burners - boiler and hlt - off a 45kg bottle. Regularly do 50/60 L batches and have done 80L. Only time I crank it is bringing water/wort to the boil. Also use it as a fine adjustment on keeping the rolling boil. Boil for 50L batch usually ring 2 and 3, lowest reg setting and burner taps not quite fully open.

Regards

Andrew
 
Back
Top