1/2" Camlock Fittings Bulk Buy

[mxd]

can I have 5 F's please

 

[jeffsonia]

Hammo7,
in regards to the PM i sent you i'll get the following:
1. 5 Type F male camlocks.
2. 5 Type C female camlocks.
3. 3 Type A male camlocks.

Cheers

 

[Kappow]

Kappow 4 x C and 4 x F

 

[seamad]

Hammo, are they compatable with snaplock cams ?
Did a quick google and couldnt find much on hi lock cams. If they are ok will order soe and pickup ashmore.
Cheers
Sean

 

[Hammo7]

Hammo, are they compatable with snaplock cams ?
Did a quick google and couldnt find much on hi lock cams. If they are ok will order soe and pickup ashmore.
Cheers
Sean

Hi seamad.
The only info that I have on them is that they 'should' fit with other major brands.
I guess it is one of those risks we have to take.
I can do another order in a couple of months if we can get a couple to test with.

Hammo.

 

[seamad]

I'll take a punt, if not compatible then will need a couple more bits.
Type C X2
Type D X1
Type E X1

Pickup Ashmore

cheers
sean

 

[Hammo7]

Hi Guys.
I have done a spreadsheet up with what has been added via the forum.
Could you please check it out to make sure I have got it right.
Please let me know if I need to make any changes.
Spreadsheet is here.

Cheers,
Matt.

 

[Hammo7]

Bank Details have been sent out.
If you have not got them, please let me know.

Thanks to the guys who have already Paid!

 

[fraser_john]

Bank Details have been sent out.
If you have not got them, please let me know.

Thanks to the guys who have already Paid!

Just paid

 

[seamad]

Paid
cheers
sean

 

[marzross]

Just paid
Cheers Mario

 

[Hammo7]

Thanks Guys.

Most payments have already been received - that was pretty bloody quick!.

If anyone has missed out on this round, please let me know and we can go again in a few weeks.
I hope we can also check to see if they are compatible with other brands at some stage.

Cheers,
Matt

 

[Hammo7]

Camlocks have been ordered.
1. Hammo: 2xA,5xC,5xE total 12
2. Maheel: 5xA,8xC,3xF Total 16
3. Mario : 2xC,2xF total 4
4. 2much2spend: 2xC,3xF,3xDC total 7
5. Fraser_John: 1xA,5xC,1xD,3xE,4xF total 14
6. MXD: 5xF
7. Fitarm: 3xA, 5xC,5xF total 13
8. Kappow: 4xc,4xF total 8
9. Seamad: 2xC,1xD,1xE total 4
10. Cruiser351: 4xA,8xC,2xE,4xF total 18
11. Somnar: 3xA,7xC,7xF total 17

Have just been told that it is going to be 2-3 days, but most of you should be able to get them by Friday.
I hope this is going to be OK with all involved.
Cheers,
Hammo.

 

[fraser_john]

Camlocks have been ordered.
1. Hammo: 2xA,5xC,5xE total 12
2. Maheel: 5xA,8xC,3xF Total 16
3. Mario : 2xC,2xF total 4
4. 2much2spend: 2xC,3xF,3xDC total 7
5. Fraser_John: 1xA,5xC,1xD,3xE,4xF total 14
6. MXD: 5xF
7. Fitarm: 3xA, 5xC,5xF total 13
8. Kappow: 4xc,4xF total 8
9. Seamad: 2xC,1xD,1xE total 4
10. Cruiser351: 4xA,8xC,2xE,4xF total 18
11. Somnar: 3xA,7xC,7xF total 17

Have just been told that it is going to be 2-3 days, but most of you should be able to get them by Friday.
I hope this is going to be OK with all involved.
Cheers,
Hammo.

:super:

 

[2much2spend]

have we got a pickup address yet?

 

[Hammo7]

have we got a pickup address yet?

I haven't been told that they have arrived in stock yet so they have not been sent out as yet.

Could you all please confirm where you want them sent or what branch you will pick them up from?

 

[Guava]

Hi Hammo et al.,

New to the community (first post actually), so bare with me if I'm doing this all wrong. I have obviously just missed this opportunity, but would be interested in getting some of these camlock fittings if you do another run. Let me know when/if you have any plans of doing so.

Cheers,

Matt

 

[Hammo7]

Ok all. Eagle has landed!
Will be picking them up after work. I'll then split and weigh, do a postal calc and arise how much will cost on postage.
Because I only just found out they were in, I may. It be able to get them shipped off tonight to the branches. This will mean that some of you still might not get them until Wednesday next week. So sorry for the delay on that I was told that they would be overnight.
Pleas send me your name and preferred pickup location or postal address ASAP.

Thanks!

 

[fraser_john]

So sorry for the delay on that I was told that they would be overnight.
Thanks!

Heheheh, chill out Hammo, don't think many of us are stressing on their arrival :lol:

Most of us are just wrapped to get them at such a good price!!

 

[Hammo7]

Heheheh, chill out Hammo, don't think many of us are stressing on their arrival :lol:

Most of us are just wrapped to get them at such a good price!!

Ha Ha, good call!

opened these babies up, and they are f'ing massive! The hose tails are more like 3/4" instead of 1/2". I'll see how I go getting them in a 1/2 inch hose!

The other thing is they are a bit stinky, so I'm going to get some silicon o'rings to replace the rubber ones.

I'll be able to supply them for approx $5 for 5 delivered if any one is interested!