Where to buy decent nano brewery systems in aus?

Australia & New Zealand Homebrewing Forum

Help Support Australia & New Zealand Homebrewing Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
The Australian importer is Newera Brewing is the importer of Ss Brewtek, to get an idea of pricing, however most of the bigger LHBS have them listed. Ibrew, clever brewing and many others have their products in their online stores. Damn, I'm beginning to sound like I work there.... Which for the record, I do not. However I am a big fan.
 
Hi If you are interested in a bit of faphing around you can buy from china import one like this for under$6k.
I bought mine a couple of years ago for $3500 US ( sadly when the Aussie was strong) and shipping landing agent fee etc was about $1500. I had to go to Sydney ports to pick up. though you just get shipped to neared place. I didn't have to pay import tax as the brewery system has CIP and was exempt.
It is 50-60 litre. Sorta BIAB as has large metal basket in the mash tun. 50ltr refrig unit under mash tun, full on plate heat exchanger, pump, 2x80ltr full jacket fermented with individual temp control, control panel etc.
I purchased it on Alibaba.com, just do a search for 50ltr beer machine.
Its a beautiful piece of 400kg stainless steel porn :)
All one piece
I had to make a small gantry crane in my shed to lift the mash basket out as quite heavy with wet spent grain. I used a trailer winch motor and 12v battery
I bought it as a retirement present for myself. Makes great clear beers. last one was a california steam ~60litres.
Only problem making 50 liter batches is storage and drinking
PM or contact me if you'd like more details

upload_2018-5-17_15-38-2.png
 
Hi If you are interested in a bit of faphing around you can buy from china import one like this for under$6k.
I bought mine a couple of years ago for $3500 US ( sadly when the Aussie was strong) and shipping landing agent fee etc was about $1500. I had to go to Sydney ports to pick up. though you just get shipped to neared place. I didn't have to pay import tax as the brewery system has CIP and was exempt.
It is 50-60 litre. Sorta BIAB as has large metal basket in the mash tun. 50ltr refrig unit under mash tun, full on plate heat exchanger, pump, 2x80ltr full jacket fermented with individual temp control, control panel etc.
I purchased it on Alibaba.com, just do a search for 50ltr beer machine.
Its a beautiful piece of 400kg stainless steel porn :)
All one piece
I had to make a small gantry crane in my shed to lift the mash basket out as quite heavy with wet spent grain. I used a trailer winch motor and 12v battery
I bought it as a retirement present for myself. Makes great clear beers. last one was a california steam ~60litres.
Only problem making 50 liter batches is storage and drinking
PM or contact me if you'd like more details

View attachment 112616
THAT truly is a thing of beauty.
 
Hi If you are interested in a bit of faphing around you can buy from china import one like this for under$6k.
That looks awesome, especially for the price you paid! ZDBrewing have some similar units, if their prices stay the same or lower I might be foolish enough to try and grab a 200L setup in a year or so.
 
Buy a few pots and spend the rest in decent fv’s and cooling.
 
Also the system is automated for mash control, and fermentation control, maybe not a bottom of the barrel bargain, but at the least good value for money.
 
I'm not saying you can. What i was trying to say is that you could use much cheaper, different equipment to make the same quality beer.
Ok, well I guess we'll have to disagree on 'same quality'. Like plenty of other home brewers I've built my own 50L rig for a few hundred bucks and have used it to beers that I like and win the odd prize but it's obviously not comparable to an engineered, automated crate brewery that could be used commercially.
 
Ok, well I guess we'll have to disagree on 'same quality'. Like plenty of other home brewers I've built my own 50L rig for a few hundred bucks and have used it to beers that I like and win the odd prize but it's obviously not comparable to an engineered, automated crate brewery that could be used commercially.

You’d be amazed the rubbishy systems that some of our favourite commercial breweries use or have used in to past to great acclaim.
 
You’d be amazed the rubbishy systems that some of our favourite commercial breweries use or have used in to past to great acclaim.

I don't think I would be amazed to be honest, having visited many breweries here and abroad. Many of them wouldn't make commercial sense for a new operation now, especially compared to the crate breweries available.
 
Bump.

Hello brewers, long time. Now that the daughter is getting older it is time for me to get back into brewing. Had a 20L Braumeister for a short while but sold that as I'm not that fussed with all in one units. Being old school I like to check and watch over things - just like when I smoke meats.

Renovating under the house and wanting to put a 3V electric system in. Any more suggestions as to this thread? What are the Cheeky Peak systems like? They have a 40L 3V setup for $1250 which may need an upgrade to a 3600W element for the kettle but not a bad looking system. Leaves money then for a Unitank and glycol.

What is around? AHB has changed a bit over the past 15 years.

Cheers.
 
Hello all. Thought I would resurrect this forum regarding nano kits. I was looking at purchasing straight from China, but I have been put off from some recent feedback. So I am turning my attention to Australian companies. Yes I know that they probably get the equipment from China anyway, but I like the peace of mind of having after sale assistant if anything happens.

So I am looking for a 100L brew kit (2V or 3V) and currently liaising with Brew-Tek, Brewtique, Cheeky Peak 130L nano brewery, and perhaps Ss Brewtech (though I think this will be too expensive). Has anyone purchased a similar kit from any of these guys? Also, are there any other aussie companies I should be looking at? I looked at Spark as well, but I understand that their smallest kit is 5hL.

Appreciate your help.
 
We're going to be ordering a 5hL system (plus FV & BT etc) from China in the next few months. Probably be space in the container for a 100L kit if you're interested in doing a joint order. From my research the price difference in the 'Aussie' systems and buying Chinese direct (considering you're getting the same system) is considerable. What's the feedback you've heard that's got you worried?
 
The two main issues are unexpected costs, particularly in relation to shipping and customs/port charges. There other is around quality. Pump blowing up and corrosion to the kit. I'm sure like anything, there is always going to be variations in quality. I'm just not sure which are the 'better' Chinese companies to deal with. If you don't mind me asking, which Chinese company are you going with? And do you have an Australian broker helping with the transaction?
 
shipping and customs are 100% a challenge - we'll be using a freight forwarder when we're ready to ship to help understand and manage these issues.

As long as the cost difference is big enough you can always get average welds fixed locally and replacement parts like pumps are easy enough (good manufacturers will warranty their stuff and use quality pumps etc.). Worst case, for the difference between a locally produced kit and a Chinese made one, you can buy a lot of pumps. Corrosion is a scary thought though!

I've spoken to a number of breweries who've sourced from China direct (and via a broker) and it's absolutely a mixed bag in terms of who to use. We only considered suppliers who can provide existing clients, in Australia, who I've been able to speak with and get their experiences. From that I narrowed it down to 2 (Yolong in Ningbo & Tiantai in Jinan). Yolong have been present at local conferences like BrewCon and have lots of local clients. Tiantai have supplied 4 or 5 local breweries of various sizes (including Black Hops original brewhouse back in 2015). The inability to go to their factory and check the kit out during production adds another challenge, but these two are big enough to worry about their local reputation.

We're not locked on either just yet (final decision pending securing a location for the install!) but we'll be going direct (i.e. no broker) as the margin they add doesn't stack up in my mind.
 
I bought a 120ltr nano kit from cheeky peak. It is only a single vessel but so far am finding it so easy to use and clean.
I haven’t used the recirculating pump yet but looks simple.
 

Latest posts

Back
Top