Fourstar
doG reeB
- Joined
- 31/10/07
- Messages
- 6,150
- Reaction score
- 40
i do the water method but with starsan i use to sanitise the hose. I simply run off a little of the beer (maybe 300ml) to ensure i knock out excessive sanitiser (usually the beer follows an air pocket after the sanitiser anyway) then transfer to secondary/keg.
Easy as pie! Ive also thaught about using a beer out connect connected to the beer out post on my keg with some line and dangle that into the fermenter below the surface . Then use a gas in connector on the gas post with a small length of line and breathe in. The only issue is i purge my kegs with CO2 first. So unless i want to pass out and/or die, it aint happening anytime soon. Maybe i can somehow fill the gas line post with water or sanitiser to create a vacuum? by pouring it out into a bucket or something as using vinyl tubing in fridge cold beer is a royal PITA as it sets like concrete!
Easy as pie! Ive also thaught about using a beer out connect connected to the beer out post on my keg with some line and dangle that into the fermenter below the surface . Then use a gas in connector on the gas post with a small length of line and breathe in. The only issue is i purge my kegs with CO2 first. So unless i want to pass out and/or die, it aint happening anytime soon. Maybe i can somehow fill the gas line post with water or sanitiser to create a vacuum? by pouring it out into a bucket or something as using vinyl tubing in fridge cold beer is a royal PITA as it sets like concrete!