Hi guys im all pretty new to this and still fine tuning the setup really but i am having some trouble with the line from my keg to the beer tap i have.
The line continuously gets a build up of air in the tap end after say half an hour of not being used. I would like to fix this. at first i thought that the tap must not be sealing properly somewhere and checked out all the seals/o-rings but nothing appears to be wrong with them except for maybe a little piece missing from where the snaplock fitting is.
The tap is this Andale one Link
after viewing the parts breakdown i was wondering if it could be the spring that needs replacing.
Any help would be appreciated aas not only does it introduce infection it makes me waste beer
The line continuously gets a build up of air in the tap end after say half an hour of not being used. I would like to fix this. at first i thought that the tap must not be sealing properly somewhere and checked out all the seals/o-rings but nothing appears to be wrong with them except for maybe a little piece missing from where the snaplock fitting is.
The tap is this Andale one Link
after viewing the parts breakdown i was wondering if it could be the spring that needs replacing.
Any help would be appreciated aas not only does it introduce infection it makes me waste beer