captaincleanoff
Kings Cross Brewery
- Joined
- 8/11/07
- Messages
- 703
- Reaction score
- 6
Located in Pyrmont for pickup. Can post the false bottom and ball valves, and could post the c02 bottle via road freight
4 x Corny Kegs - $180 - will only sell in lot of 4
Need a bit of repairing. One of them holds pressure no worries, but 3 have very slow leaks out the gas post. They are fine if you have a line going into it, but with nothing attached they lean. Purchased reconditioned about 10 years ago and haven't serviced them at all. Will come clean on the inside. All are a bit beaten up on outside as standard with old cornys.
c02 Bottle - $50 540g capacity
Good condition, a few scratches on the label. Only ever used to dispense one keg so must be almost full. Measures 28cm high.
False Bottom $30 - 30 cm
Good condition. Purchased from beerbelly.com.au. Made from perforated stainless sheet, approximately 2.06mm holes. Supplied with stainless elbow fitting and 3/8th" hosebarb to attach hose to.
Ball valves - $30 in lot of 3 only
3 different brands, might need new O rings
4 x Corny Kegs - $180 - will only sell in lot of 4
Need a bit of repairing. One of them holds pressure no worries, but 3 have very slow leaks out the gas post. They are fine if you have a line going into it, but with nothing attached they lean. Purchased reconditioned about 10 years ago and haven't serviced them at all. Will come clean on the inside. All are a bit beaten up on outside as standard with old cornys.
c02 Bottle - $50 540g capacity
Good condition, a few scratches on the label. Only ever used to dispense one keg so must be almost full. Measures 28cm high.
False Bottom $30 - 30 cm
Good condition. Purchased from beerbelly.com.au. Made from perforated stainless sheet, approximately 2.06mm holes. Supplied with stainless elbow fitting and 3/8th" hosebarb to attach hose to.
Ball valves - $30 in lot of 3 only
3 different brands, might need new O rings
