Search results

Australia & New Zealand Homebrewing Forum

Help Support Australia & New Zealand Homebrewing Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. andytork

    FS : Mel : 6 way flooded font $75 , Free tiny freezer with temp c

    6 way flooded font , little weathered has 5 Snaplocks, comes with JG fittings for bottom and nuts / washers etc , can include about 6m of insulated line for it too. May polish up $75 Free tiny freezer with temp controller and pump, only about 45 cm wide, was used to flood the above font...
  2. andytork

    FS : Melb : Books

    All pretty much as new $20 Each All pickup Boronia VIC, or can post for $13 each (Australia post satchel)
  3. andytork

    FS: 4x motorised ball valves, $50 posted

    4 stainless ball valves 5 wire (2 motor, 3 for open / close sensor) $50 for all 4 posted or $40 Pickup Boronia, vic
  4. andytork

    FS : Mel Keezer (699 Litre, with regs , manifolds etc)

    699 Litre F&P Freezer, about 4 years old. (bought new for over $1500). Currently a used one on ebay for $989 (http://www.ebay.com.au/itm/Fisher-Paykel-Chest-Freezer-Model-H701-/262814001362?hash=item3d30ef68d2:g:JiMAAOSwiONYPRX3). Measures 175cm(w) x 72cm (d) x 97cm (h). You can pretty much...
  5. andytork

    FS (mel) : 2x bench cappers

    Got two bench cappers located Boronia 3155. $10 each for $15 for the pair Thanks Andy
  6. andytork

    FS : [MEL] Thermowells, ball lock QD's, temp controller, pump, mot

    Going through the garage again, found lots of stuff again (attached some generic pictures for the picture police) - All items are as seen / described weldless thermowells, I have 5 of the following, 100mm length (protrusion), 3/4" hole required $35 each posted, or $25 pickup Temp...
  7. andytork

    FS : Melb : Couple of commerical couplers and an andale regulator

    As per title / pictures Got to be worth 50 clams for the lot (the fittings on the coupler are worth more) Pickup Boronia can post, but I am away from Wednesday for a week so would have to wait until I get back possibly
  8. andytork

    FS : Melb : Fittings, beer line and some freebies

    Hi everyone Cleaning out my junk Free eskie mash tun, needs a good clean, comes with lid Free stainless pot 38cm x 38cm , needs a good clean Free 20l keg with s-type? fitting Big Bag o' stainless, lots of fittings, some t-pieces etc $30 Box of john guest and other useful stainless...
  9. andytork

    FS: VIC, boronia, 19L keg

    Cleaning out garage found a 19l keg I no longer need. Genuine corny / pepsi-cola, very good condition, rubber top / bottom, ring-pull style PRV, new posts $50 pickup Boronia, Ideally today / tomorrow as I am away Tuesday If anyone really needs a picture I can take one, but you probably won't...
  10. andytork

    Vic : Freebie ! Ancient bar fridge, a little bit nasty,

    My old single batch fermenting fridge, fits some 20 odd litre fermenters depending on dimensions My ghetto compressor hump shelf comes for free :D Pickup boronia
  11. andytork

    FS : Vic, 5 crates and five boxes of long necks

    Must be 80+ bottles ? two of the boxes can't be seen in photo All the Boxed ones are wrapped in paper and are clean. The ones in the crates are source unknown (some may have beer in, not mine) Pickup Boronia this weekend or before $30 for the lot ?
  12. andytork

    Vic : Freebie ! Ancient fridge, cold as ice, a little bit nasty

    Free fridge Gets real cold real quick, will clean up OK, no damage as such Could do with a clean, was used as an emergency fridge around March, no issues Collect for free from Boronia ASAP as I am cleaning out the garage and doing hard waste this weekend I can throw in a piece of thick...
  13. andytork

    [VIC] FS : 3v Electric Brewery

    All, Not brewing anymore and we are looking at downsizing, just sat there gathering dust HLT - around 95 litres 2200W electric, fed from solenoid water inlet through 2 stage filter, has sight glass, mechanical temp gauage. Has its own mag drive pump below to push to mash tun through stainless...
  14. andytork

    [VIC] FS : 50 Litre Pot, secondary manifold + other bits

    All, Next part of clean out 50 Litre pot (approx) 25cm high, 50cm diameter, aluminium pot with lid and 3 piece ball valve. Served me well for lots of single batch AG in the early days, filled to the handle rivets on a one hour rolling boil reduces to almost exactly a cube $40 Pickup only...
  15. andytork

    [VIC] FS : 4x 19L Kegs, gas manifold and bits

    Lot #1 4 x 19 Litre Ball lock kegs, all hold pressure (just tipped beer out that has been in 12 months and were still holding pressure). Have had a quick dip in perc/met and a quick external scrub today. The worst one is pictured on the right, has a ding at the top. The other 3 are as good as...
  16. andytork

    Selling up / downsizing, 3V electric rims, fridges, kegs, mill

    We are having a downsize and due to recent health changes I am not brewing the quantity I was so therefore having a cleanout and downsize Auto brewery, as pictured but has a RIMS tube installed and plate chiller. HLT - 2200W electric, fed from solenoid water inlet through 2 stage filter...
  17. andytork

    FS : Small A- type keg (19litre?) + 3 outlet secondary reg board (MELB

    Found this hanging round from the keg bulk buy I did last year, no use to me Size is 565 mm high (total), 225mm diameter. As stated has a Guinness / Heineken style type-a connection. $35 Also have the following, (Sorry for the ebay photo & description). Mine is still boxed, didn't want to...
  18. andytork

    MEL : 700L (?) Chest freezer faulty $50 anyone ?

    Got a kelvinator chest freezer (1.7 m wide), probably 700 litres ? Won't drop below zero , compressor runs, so probably needs regas. If its any use to anyone its in the back of my ute and I can drop reasonably locally if someone is there to unload it. I am in Boronia and will drop within 15...
  19. andytork

    FS : 5 x 19L Kegs

    5 x 19 Litre kegs Supplied with new ball lock fittings & poppet's, seals all good, need a clean. Genuine Corny, with ring pull style pressure relief valves. All good condition, no major dings or damage to rubber top / bottom etc Sold as set only, won't split as I have wasted too much time...
  20. andytork

    Fs: Vic bar / restaurant with possibility of micro brew

    Due to family issues we are selling our bar / restaurant. Place has great potential but due to personal issues we can no longer give it the commitment. Has heaps of potential for craft brew bar, lots of locals and possibility of a small brewery (which was my long term plan) It's listed through...
Back
Top