Search results

The sodastream bottles us a double helix thread which we have not found anywhere else other than in our yeast collection bottles and sodastream bottles. I am sorry we have no plans to make an adaptor to Tri-clamp at this stage. our yeast collection bottle is just under 14cm high.

4. Do not draw product from the floating dip tube until the hops have sunk out of suspension. If you use a high amount of hops they can block up the dip tube. You can clear out a dip tube with back pressure if you really stuff it up but really i recommend waiting for hops to settle before...

Just to clarify this point. If you are half decent at drilling holes and drill in the thick part of the cone as we have recommended in the video there is a good chance that it will easily hold pressure. The issues is its simply impossible for us to guarantee that it will hold pressure as we...

There is no issue using up to 5g/L but if you wanted to do this we can give you the following advice: 1. If you use the yeast collection bottle to add hops do not add more than 30grams for one yeast collection bottle. 2. If you dump all the hops into the top of the Fermentasaurus at once then...

1. The Fermentasaurus has been designed for all grain brewing. 2. If you are using the yeast collection for hop additions we would recommend that you only use 30grams at a time. Then remove the yeast collection bottle then re-attach again a couple days later. If you really want to use bottles...

We find this a strange conclusion. During the development of this product all brews that we did were with all grain beers. At Keg King all the staff involved in the development of this product are all grain brewers. At Keg King Springvale if you walk into our home brew store in Springvale we...

There are ways to reduce the oxygen exposure during bottle change overs. Some solutions include: 1. purge the bottle with CO2 prior to attaching to the fermenter. 2. Fill with boiled water before connection but this will dilute your beer down slightly so your recipe should be adjusted to...

We would not recommend adding 100grams of hops at one time in the collection bottle. They swell up too much and can clog the valve. If you want to add 100 grams then simply use the collection bottle to add 30grams, then change over the bottle then repeat this step. Definitely 100grams in the...

This product has already been finished and it's been released and we have already put some stock in our retail store and also sending a pallet of the fermenters to Grain and Grape soon. We have not really promoted them yet as we don't have enough stock. We already have pending orders to...

Hello there, These temprite systems are best operated with nitrogen/co2 mixed gas. The problem is that if you use CO2 as the temperature of your kegs changes you can start to get flat beer or over carbonated beer. If you have a high turnover bar and you are hammering through the kegs every...

With regards to the Fermentasaurus this is an exciting new product that as pointed out by some of the other forum members it's a product that is made in Springvale at our new blow molding and R&D facility. We have been using these fermenters our self for a while now and we have been doing a lot...

Hello Sp0rk - Mayor of Pooptown, I rarely hop on this forum but i see we were mentioned in this posts and there seems to be some misinformation here. There is not a single thing that we purchase from Alibaba. You are right in saying that a large portion of our gear comes from China if that...

that looks like the perfect test fridge with our tap right next to the Perlick ones. If you remember it would be great if you could report back with some feedback after a few months of use.

Hey Guys, Yes it's Kee here from KK. We have several burners where the high pressure regulator with the burner is not suitable for use with that burner. The burner is a high pressure burner which will burn efficiently up to 210kpa however the regulator can be regulated up to about 300kpa...

Hey guys, We have been setting up a bunch of video to show people how to use our products on our Youtube Chanel. If you are having trouble setting up the temp controllers I think it's worth if you have a look at this video which explains the controllers in quite a lot of detail...

Hey Guys, One of our customers who is a member on AHB came into our Springvale store and said that I should put up a post regarding the sanitiser so here it is. The phosphoric sanitiser that we used to sell was a product that was made by Cleantech. Since Cleantech was purchased out by the...

I know quite a bit about this topic so I though I may as well hop on here to give my 2 cents. The main kegerator that you guys seem to be talking about is what we call our Keg Master Series 3 (aka Keg Mate or Fridge that Ross sells) Up to April 2010 the actual fridge part of the kegerators...

Hello Guys, It's Kee here from Keg King. I dont usually go onto these forums unless I am looking for some mashing tips but when you see a thread that is about your own business I guess you feel compelled to say something. Hydrostatic Test Stamp All our cylinder are hydrostatically tested...

Hello, It's Kee here from Keg King. I can confirm for you that they are exactly the same. Keg Mate and us use exactly the same model fridge but he uses his own parts. I believe his parts are from India not China. As of June 2009 all of the ones we sell now use our new taps which are FAR...