Search results

ok, can understand how that would be a problem. im thinking the easiest and cheapest option is for me to use on of my barb QDs.

cheers, will give it a shot.

I have put some thread tape on them...will have to test and see. I have just been turning the gas off until it becomes to slow to pour for the time being until i know for sure they arent going to leak on me again....dont want to lose another bottle of CO2

I havent had any issues with them for over two yrs....they are always inside the fridge so didnt think a temp shift big enough would be possible. I have some barb QDs at home so could just switch over to them....just liked the ease of JG fittings.

sorry should have said that. it is coming out where it screws onto the QD

Hey all, Hoping someone might be able to shed some light on an issue I am having. Came to pour a beer one arvo and no gas :(. Opened the fridge to find beer had sprayed down on one of the kegs. On closer inspection it seems to have come out from the Female Adaptor which i use to connect to...

Cheers guys, big help!!!! Can't believe how quick the response was.

I was hoping someone might know which JG femail adaptor will work with the long shank flow control tap from mybeershop MyBeerShop - Long Shank Tap Female Adaptor Female Adapator - Thread 1/2" BSP x OD 5/16" (8mm) Female Adaptor - Thread 5/8" BSP x OD 5/16" (8mm) Cheers guys Ben

awesome info, tks so much. has cleared it all up for me

not really worried about adding another step (time is not an issue). thanks for replying so quick! The initial drain of the MT where no water is added never done this before so I can expect a slower drain of the MT than normal?

Hi, I am looking to brew the following APA - 1.055 OG 7.02 kg MaltEurop Australia Ale (4.1 EBC) Grain 83.75 % 0.31 kg MHB - Amber Malt (45.0 EBC) Grain 3.67 % 0.31 kg MHB - Munich (16.0 EBC) Grain 3.67 % 0.25 kg MHB - Wheat Malt (3.3 EBC) Grain 2.94 % 23.97 gm Magnum [14.00 %] (60 min) Hops...

Cheers. I have the pressure pretty well set so that i can pour the beers bloody well with the craft brewer bronco faucet and hose http://www.craftbrewer.com.au/shop/details.asp?PID=729 So these should fit right in?

just scored a new 2nd hand fridge. I have moved the kegs into this fridge which is now inside. I wanna set the fridge up so that it has at least 2 taps (at most 3). Any idea on how these taps perform? http://www.mybeershop.com.au/index.php?mai...products_id=100 Are the celli flow controller...

too easy, thanks guys.

can anyone tell me if this controller would work with the stainless ntc sensor at craftbrewer? http://craftbrewer.com.au/shop/details.asp?PID=955 Or a cheaper option would be to stick the sensor into some copper tubing filled with thermal paste and hang it over the edge of my HLT?? Just...

reg is the medium pressure reg from beerbelly + an italian spiral. didnt think those fittings would have any flow restrictions, will take a closer look.

ok, i think i might have found some adapters to do the job Right angled adaptor to convert a POL outlet to 3/8 BSP-LH outlet. http://www.downundercamping.com.au/product...=585&page=3 Adaptor (straight) to convert a POL outlet to 3/8 BSP-LH outlet...

mine is supagas

i know i can get my 9 refilled for about $25, my 45 costs me 95. not a huge difference i guess.

thanks guys, guess i will have to get the specs for the reg supplied from beerbelly and see what will work. that brass rod looks nice though.