Search results

Hi Lagerfrenzy Yep that is the NZ ones I found. Will PM you re the ones you have Thanks james Sent from my iPad using Tapatalk HD

Lagerfrenzy Please be so good to enlighten me as to where on ebay you claim to have found these elusive hops? I started on ebay when it was still in the bay area and run several accounts since but bugger me I can not find them. Help, please James Sent from my iPad using Tapatalk HD

Thanks Or if any one can point me in the direction of some. There are some in NZ but is going to cost a cool $100 for a kilo Any one care to split ? James Sent from my iPad using Tapatalk HD

Re Split pins I use lengths of stainless steel welding wire. Cheap as to replace. Have broken 4 or 5 but never anything else. I could go to a larger diameter wire or change to hardened steel but the whole point is for it to sheer? James Sent from my iPad using Tapatalk HD

Howdy brewers Anyone happen to have any nelson sauvin hop pellets they could spare? Need about 70grams but interested in what you have. Will pay and post or maybe pickup if in Sydney? James Zwitter Sent from my iPad using Tapatalk HD

Prices (as given by supplier) "A" - 64oz (2L) mini keg with any head unit and a premium mini reg $130 "B" -1 Gal (4L) mini keg with any head unit and a premium mini reg $140 "C" - 5L with any head unit and a premium mini reg $151.50 Extra 64 oz (2L) keg $33 Extra 1gal (4L) Keg $43 Extra...

Hi Ken You are getting excellent assistance from some of the guys here but another thing that may come into play is the position of your temp probe. There is setting for internal and external and pump in boil etc and PID settings. All these will affect the way your system operates. The recent...

Hi Jabbos The wiring is probably OK but the use of 2 same coloured wires makes it confusing. Should use different colour for + and -. You do not need both SSRs. I would program the new arduino mega just using the USB to power it. Then if you can measure the voltage on the plug from power...

Hi Arduinos are amazing but even the experts blow them up. I have 2 dead R3 s and now a dead mega as well. Plugged the mega in backwards when tired and does not work any more. I think it sounds like the Arduino is shot. I would also say that the recent code I think still runs in the cheaper...

My mill will start with a hopper full of grain but have to crank up the speed knob and then turn it back down. But if i have it running and add grain it gust chews threw it like it was on a picnic. James Wheat gives it a work out though Sent from my iPad using Tapatalk HD

Howdy gentlemen I have brewpi running on Arduino via BT using the HC05 board and talking to a Raspberry Pi running Wheezy. I did briefly run a second brewpi based on an Arduino nano over BT to same Raspberrypi Was stable as a rock in old drinks fridge. Temp control is unbelievable. Getting...

Hi Brauduino builders. Well I have put a small SSR in to one of my controllers to drive the pump. This does require some soldering skills and a solder sucker or solder wick so not for the non electronics folk. It does give the option to take the 240 away from the PCB but I have actually left...

Hi Tzoon A thought about your heater issue. You need to run setup and choose electric instead of Gas for the heater source for the arduino to switch the pin that drives the SŚRs? James Zwitter Sent from my iPad using Tapatalk HD

Hi Tzoon I can not see an earth on the SSRs / heatsink? As far as the fault. At any time has the 12v been connected backwards? If you unplug the SSRs does the load turn off? If it turns off then the SSRs are ok. It may be the transistors. But the LEDs word so ? I think there was some wrong...

Hi What bottle do you have? MKOL? Or? If you get really really stuck I have full MKOL cylinder could lend till the shops reopen. Search Gumtree i picked up a couple of MKOL cylinders over the years through there. I am near North Parramatta so close by. Zwitter James Sent from my iPad using...

Hey Barneey Looking good The Grainfather and brauduino make a cool setup. That new one from KK is not bad but needs a few options to make it as nice. Zwitter Sent from my iPad using Tapatalk HD

Hi Tzoon Some questions Note these tests can be done with no heaters or pumps etc connected. But the board must be run from the 12 volts not the USB. Do not plug the pump connection to the PCB as that would put 240v on the PCB and may be a little dangerous. Do the LEDs on the SSRs themselves...

Hi Vortex I have the Chronical 7 but the ball valves came apart easily, I just never put them back together as purchased butterfly valves from USA and other sanitary fittings from China. Sent from my iPad using Tapatalk HD

Hi Bunglebear The linking of the neutrals is a bad idea as has been stated. If you live in a house with only one phase and you do not have individual ELCBs / safety switches and if everything is wired up correctly THEN maybe it would all work fine. BUT the whole reason behind the second power...

Hi real beer I would not use those in high current connections. They are usually for low current applications. Not saying no but make sure the connections are up to the job. Really the element connections should be short and well connected. James Sent from my iPad using Tapatalk HD