Search results

Australia & New Zealand Homebrewing Forum

Help Support Australia & New Zealand Homebrewing Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. T

    Kegland Reg

    Sorry what I mean is that whatever it is set to the empty keg won't fill to that setting. It's generally stays close to 1 psi. Disconnect and it shoots back up to 12 (or whatever I have it set to)
  2. T

    Kegland Reg

  3. T

    Kegland Reg

    500
  4. T

    Kegland Reg

    Hi Hoping someone can assist here. It's only been a recent problem and I do apologise in advance if I'm not using the right terms. I want to fill an empty keg up to 12psi for a transfer. With the reg disconnected it is at 12 psi but when I connect it to the keg it doesn't fill up to 12 like it...
  5. T

    Dropping Temp Query

    Pitch at 23 and drop the temp to 13 on the temp controller after 24 hours?
  6. T

    Dropping Temp Query

    Hi all I'm making a Coopers True Aussie Bitter and it states the following: We recommend pitching Lager yeast at 22C-24C then allowing the brew to drop to as low as 13C over the next day or so. Might be a silly question but how does that look??? I ferment using a fridge that is temp controlled...
  7. T

    Fermizilla Cave In

    So the cave in is common or do I need a new fermenter?
  8. T

    Fermizilla Cave In

    Hi When I cold crash my fermenter caves in. I even put 5psi in it before cold crashing and it happened again. Any ideas? I've tested the fermizilla and it has no leaks Thanks in advance
  9. T

    Pitched too low

    Thanks guys!
  10. T

    Pitched too low

    I buggered up and pitched a Coopers yeast for a draught at 14 degrees instead of the recommended 21 degrees plus. I also have realised I didn't have the heater plugged in so it's stayed at this temp for 24 hours. Should I get it to the required temperature and pitch again or will I be sweet...
  11. T

    Straining Hops

    Thanks for all the advice. How is oxygen an issue if I haven't started fermentation yet and closed the fermenter lid?
  12. T

    Straining Hops

    So in other words toss the sludge out?
  13. T

    Straining Hops

    Hi All Probably a silly question but I'm making a Shark Attack XPA. At the beginning I have to boil 3 types of hops and then strain it into the fermenter. I use a strainer for flour etc. When I do most of the green 'gunk' remains in the strainer. 1.What strainer should I use? 2. Should l keep...
  14. T

    Dry hopping - magnet

    Thanks for the advice all
  15. T

    Dry hopping - magnet

    I bought the same set he has
  16. T

    Dry hopping - magnet

    Thanks mate. Just purchased one. What's the reason behind putting the magnet in the zip lock bag?
  17. T

    Dry hopping - magnet

    Hi I am keen to take the next step and try dry hopping in my fermzilla all rounder. What do you use as a magnet and in particular what do you use inside the fermzilla. Some links would be greatly appreciated Thanks
  18. T

    Thomas Coopers Brew A IPA

    What temp did you pitch and brew at using the same yeast????
  19. T

    Fermzilla

    Think I'll do that now
Back
Top