Search results

Australia & New Zealand Homebrewing Forum

Help Support Australia & New Zealand Homebrewing Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. lespaul

    No Chill Containers

    might be missing the point again, get an untainted cube and use it for brewing only. way to easy to get flavours into the plastic.
  2. lespaul

    Brisbane Grain Bulk Buy June 2017

    Ill probably grab 1 - 2 for ***** and giggles edit: Hoppy Days my vote
  3. lespaul

    New Grainfather Conical Fermenter

    Seems like the jacket system and glycol chiller is wayyy too much money for something thats limited to 30lt, overkill?
  4. lespaul

    Hi everyone (Gluten free brewing)

    Im currently sourcing some Clarity Ferm to use in a "gluten reduced" beer. Although i know it isn't specifically certified as gluten free, it has been really successful with celiacs. Have you tried it? Also keen to hear of some of the gluten free recipes everyone has.
  5. lespaul

    The Brauduino (Matho’s Controller) Build/Advice/Question Thread

    Thanks again. Ive read a lot of this thread and tried to do a search but didnt yield anything... sorry for the double up. Im not near the setup right now but from memory: The lights were working with the buttons fine. Pressing the button you could hear the ssr click. No change in voltage for...
  6. lespaul

    The Brauduino (Matho’s Controller) Build/Advice/Question Thread

    Hi all, Got this project cracking along (with the little spare time ive got!!!!) but its about 50% there... why does SS take so long to drill!!!! Anyway, the unit is wired up and my sparky mate and I did some initial tests on it and it seems the pump is active with and without the pump turned...
  7. lespaul

    Braumeister NEXTGEN Build

    also to who ever recommended these guys https://www.boltsnutsscrewsonline.com/ thanks, they were a bargain!!
  8. lespaul

    Braumeister NEXTGEN Build

    Suppose i need to get this project completed. Just ordered all the nuts, bolts, wingnuts, seals, threaded rod etc. My main road block has been the cost of the stand/legs. Can any welders advise if these legs...
  9. lespaul

    Braumeister NEXTGEN Build

    Nice one ferg! What were the legs you used?
  10. lespaul

    The Brauduino (Matho’s Controller) Build/Advice/Question Thread

    Yeh. I personally had no idea. I assumed but I thought I'd ask anyway. As a side note the electrician wasn't happy with the jaycar crimps, said they were a poor fit and no insulation over crimp. He didn't like that all the earth points weren't together (each input had its own separate earth...
  11. lespaul

    The Brauduino (Matho’s Controller) Build/Advice/Question Thread

    Is the board rated to 250v. The sparky is worried about the power is going straight to the board. Edit: he can see the relay is rated to 250v but he just wants to double check the board is?
  12. lespaul

    The Brauduino (Matho’s Controller) Build/Advice/Question Thread

    what is the likely temperature of the heat sink? im just sussing out the silicone options
  13. lespaul

    The Brauduino (Matho’s Controller) Buy thread

    Thought I better do it before real beer has a fit
  14. lespaul

    The Brauduino (Matho’s Controller) Build/Advice/Question Thread

    haha i knew someone wouldn't like blue/green! but paint only has limited abilities!!! ok it is wired as per the "blue" wire... except the blue wire is actually red :)
  15. lespaul

    The Brauduino (Matho’s Controller) Build/Advice/Question Thread

    Sorry if that was for my benefit zwitter, it went over my head. Can you make reference to the diagram I drew? I've wired it up as per blue wire. If it wasn't for me disregard.
  16. lespaul

    The Brauduino (Matho’s Controller) Build/Advice/Question Thread

    ok that diagram didnt probably explain it correctly My problem is the area circled in yellow has 3 points and three wires don't fit into the yellow spade. so how do I wire this as per the original diagram posted by MB? My alternative is posted below in blue. i.e do i either wire up the green...
  17. lespaul

    The Brauduino (Matho’s Controller) Build/Advice/Question Thread

    OK so I just wired it all up except the earthing wires the main in and out (ran out of spades!!!). Dunno if anyone can find any faults before I take it to a sparky? And if anyone knows or is a sparky who can check it in Brisbane let me know!! Only took me 7hrs and a t shirt (got thermal paste...
  18. lespaul

    The Brauduino (Matho’s Controller) Build/Advice/Question Thread

    Ok, so im having a little trouble deciphering this. Is it possible to wire the active up with 2 wires out of the SSR, as per diagram ive drawn? I just cant fit the 3 wires into the spade fitting as per original diagram, outlined in yellow. This would then mean i dont have to wire the purple...
  19. lespaul

    The Brauduino (Matho’s Controller) Build/Advice/Question Thread

    So the "speaker cable" I got is figure 8 7.5 amp rated cable. Is this the same as the cable mentioned in the video for the SSR? Also the brown flex cable doesn't say what amps it is. Would 10 amp be fine or should I go for the 20 amp? As a side I got the 2.5mm twin and earth for the other wiring...
Back
Top