Search results

@KegLand-com-au Any chance of making duotight to stem fittings? They would be good for your in-line regulators and spunding blow tie valves. Instead of your brass and other joiners, you have stem to push fit fittings in the various sizings. I know that a 3/8" Stem to 8mm Push fit would be very...

Thanks, I actually have 2 of the ssbrewtech brite tanks, which I cool with the g40, and serve through a flooded font. So no need for the QD. They are a great looking product, so will definitely use them if I go back to kegging.

I got that, but I was just wondering if this could also be an option. I have flow control shanks on my system and they work fine. I just thought by being able to reduce flow by dialling down the PSI would mean a one time set and forget, so that no matter what volumes beer you throw at it it...

Can the inline regulators be used as a flow control device? For instance to reduce the beer to 1-2 psi just before the tap.

Bigger

No problems, actually the pump and heater are custom, it's only the power that is the standard 5mm 2.1 fitting.

Hi, the power and the pump on the ssbrewtech ftss is the 2.1 style, but the heating cone membrane thingy is a custom size.

No problems. Also note this would only work if using glycol, as if you are planning on using it as an icebank the ice will also freeze the submersible pumps if the bank is big enough.

Good luck!!

You could I suppose, but it would be tight. I had to do some fancy zip tying to position my submersibles tubing from encroaching on the impala pump. It was a while ago I did it, but from memory it has an outer coil and an inner coil, so say 40mm from all sides, so it adds up, or in your case...

Hi Steve, I have the g40, and have taken the stainless coils out of it, and have 3 of the ftss submersibles in the reservoir running out through the holes from the coils. I have john guest pushfit fittings immediately upon exiting and also have them at my ssbrewtech cooling coils. Works great...

Can out of state brewers enter this comp, or is it for Victorians only?

Same, I was just curious as to how the results and feedback are returned. Some comps put it on the website, some post out the results by mail. I'm in no rush. Thanks for everyone involved in the judging, website, etc etc... Daz

Are the results/ feedback emailed, posted, or put online?

Would a NEIPA, go in the American style IPA, or Speciality IPA category? I'm hoping to have one ready in time, along with a American Pale Ale. Thanks Darryl

Have gas disconnect with the male flare option. Then this https://www.chicompany.net/index.php?main_page=advanced_search_result&keyword=04C03324ih&search_in_description=1&categories_id=&inc_subcat=1&manufacturers_id=&pfrom=&pto=&dfrom=&dto= Which screws into a 1/4" npt tee...

https://www.ibrew.com.au/collections/john-guest-fittings

https://www.brewhardware.com/product_p/flarem14xfnpt14.htm

I have heaps of 1/4" npt to 1/4" mfl adapter's, and just use John Guest flare fittings. You can also just get the 1/4" mpt John guest fitting to attach directly

Sorry, my bad. https://www.valvesonline.com.au/stainless-steel-adaptor-bsp-to-npt