Search results

Looks cool

Warm transfers work if you keep the pressure up, otherwise your beer drops the gas out fast causing foam. Similar to opening a hot can of beer and pouring it into a glass, goes frothy and blows foam every where. Same inside your kegs, due to opening the can a pressure drop occurs and foam results.

If your transferring at room temp. Eg 20 degrees, you will want the receiving keg at least 22-24 psi or more as the supply keg will be at 24-28 psi depending on carb level. Any less in the receiving keg will be causing foaming in the lines, as well as a very frothy beer in the receiving keg due...

The environment in a fridge is dry due to the evaporator sucking moisture out of the air due to the refrig effect , similar to an aircon the system pulls moisture out as it cools down and this moisture then runs out a drain somewhere. The time moisture will appear is when you open and warm humid...

Great info, I'll hold off on doing anything more than my perc rinse... Cheers

Ok, just got home from camping and rinsed out my 3 minis that I've had issues with my beers while away. I've filled them up with tap water and added 3 spoons of percarb to each for an overnight soak as done in the past. I got my 4th mini out of shed and borrowed a friends inspection camera and...

Cricketers arms is not a bad drop btw Anyway , yeah a Ris would mask it abit My Aussie lager and rice lager were the worst but these are crisp light flavoured anyway My LC pale ale we tried tonight is closer to a IPA was ok first sip but then the metallic taste showed its ugly head It's a...

Ok, cracked into my LC pale ale tonight , been in mini for 3 weeks. Metallic taste , yuck tipped straight away. Had to run into town and grab a slab of cricketers arms pale ale which was the best priced pale at the bottleshop. Buying slabs hurts when got heaps at home but these minis have kept...

Not looking good on my minis First keg at camping with rice lager last few days had a metallic twang Second keg me and a mate cracked open tonite while away , has an Aussie lager in it Undrinkable, twangy and metallic taste all through it... So bad, we ended up going to pub to buy a carton , Got...

Well, I'm away camping ATM , and dragged my 4 minis down. Previously I've stated that I've had no issues. The longest mine have been filled was about 2 weeks. Tested mine last week all was ok . Started into 1 keg last night with a rice lager, drank the whole keg , was still good till I got to...

I just tested my mini 5 ltrs from bulk buy 2 using a very strong magnet I use in the electrical trade to find steel plates through gyprock and timber walls. My kegs have no magnetic on the side walls or top cone. They are slightly and I mean slightly magnetic on top rolls off the top section...

Well I thought I would add my discoveries, good for me so far...... maybe, and this is not knocking the good work from others or the bad luck from others as I may still have ticking time bombs..... I bough 4 x 5 ltr kegs bulk buy 2. Cleaned with percarbonate soak for 1 hour then rinsed with...

It will require a 15 amp point. Not sure what these would be shipped to you with either 10 amp standard plug top, small pins Or A 15 amp plug with large earth pin, small active and neutral pins. Not sure if these Glutens are aust standards electrically compliant, I'd be checking with the...

Yeah , I've been time poor last 7 month, work, family...... This has saved my marriage lol and works good enough for most of my staples. Setup, mash in fri night, boil, hops cube first up sat morning. Done....

Good experiment Zorco, keen to see more results, something's going on,

I also have 2 with slight imperfection welds on the neck and 2 that look ok. All were from same buy, Will report back when I pour a beer

Just got home and wow, after seeing this thread unfold, I've got 3 minis filled with beer for camping next week. 1 with a really light rice style lager and the other 2 with lc pale ale . I filled these to the max under pressure from my big kegs, so alittle seeped out the relief valves. Anyway...

Hey mate, I'm a fridgie/sparky but mainly work in commercial Anyway Your fridge possibly went into thermo overload protection , I've seen this on hot days when people try and cold crash 40 odd litres of liquid down and the fridge can't handle the load and the compressor gets too hot and goes...

I've got 4 of these from last bulk buy. I've only been using 2 for weekend jobs but sometimes they come home with a few schooners left and have been fine by the next weekend. I used them at Christmas for 2 weeks filling them from main kegs at a camp site. My other 2 haven't been used yet. I...

30 amps, depends on what his mains supply rating. He's got 3 phase for his Ac , he may have upwards of 50 amps per phase depending on the capacity of the mains cable or more.Plenty of juice for 2 x 15 amp separate circuits for 2 x 3600w elements. I wouldn't run seperate 3 phase circuit and...