Search results

Hi Edak, I think that will be same with any other flowmeter. If theres air / bubbles in the fluid it is measured and counted as fluid incorrectly. But it depends on what accuracy you are trying to achieve, and the purpose of the flowmeter as to whether this is a problem or not. Its probably...

Will do Mate, hopefully today.

No worries Notung, Just make sure your logo is in black and white and its simple. cheers, Chris

No Probs Tony, The panel is in todays post. Let me know if any issues. I made the 4 switch holes a bit smaller - 13mm. Left the screw holes large enough to go over the screws though, as said if you try to screw theu the panel it will probably get distorted a bit by the head of the screw and...

Hi Bonj, They are a special plastic for safe use in a laser. They bend slightly lower temp than acrylic, and you can do it with hot water but its a bit hard to do it neatly. If there is demand I will set up a heat gun, but unfortunately it adds to cost, I am trying to keep the price as low as...

Hi Edak, I can make a custom panel no probs, but would need just a photo and some outside dimensions of your controller to give you an idea on price. If it was about the same as the standard one, you could probably add 10 bucks for doing a special, that would be about it. Then if you wanted...

Howdy All, As requested by a forum member, I have made up a sample of some tap labels. Both are designed to fit under the handle top, and they have a 10mm hole pre-cut. Several Colours are available... Woodgrain with white text. Black with white text. Red with white text. Yellow with black...

Just let you know that I've made up some stick on facia panels for the Braudino, and posted a thread in the Gear and Equipment section. Not sure if its cosha to post in 2 places, sorry if it isn't. Cheers,

Howdy Lads, Seeing as I've made some other stuff on the AHB forum recently... I would just like to let all you Braudino fans know that I can post you a 'stick on' facia panel in either of the styles below for $20 including postage. Can customise text - add $5. Can add your logo, but it MUST be...

Sorry I dont have time to PM everybody when I've sent your tags, but 6 sets are in todays post... cheers, Chris

Hi jayCee, If you just wanted the same sizes, but rectangles with no holes that wouldnt be a problem. I can do the same but a thinner material with a sticky back if you were thinking down the lines of a sticking it on. cheers, Chris.

yes Mate, but you obviously need a heat gun, not bare flame, we have bent this stuff before, you just warm it till its a bit 'floppy'. (can only imagine some of the posts coming after that description). Can also do something like a tap font in acrylic, with frosted writing / logo. NOTE- The...

I've been asked about using other colours... Yes, I have them but not in offcuts, only using new material so they would be $13 a set incl postage. Colours available at short notice are... Yellow background - Black text. Blue background - White text. White background - Black text. Woodgrain...

Cheers Cocko, Its cheap because at this stage its offcuts. If I use all of them (about 30 odd pieces), I will probably have to ask about 3 or 4 more bucks more for a set. Thats also why I'd sort of prefer to keep it to 10 bucks in an envelope rather than checking bank accounts etc and messing...

Hi BPH87, Just send me a PM as mentioned in the first post mate... cheers...

Thanks for all the replies lads, sorting out PM's now...

cant argue with that....

Hi Mark, Its a plastic material specially for use with a laser. Can be washed etc. Cheers, Chris.

Mine has done the same, but the whole plating has come off, i just clean it gently with green scotchbrite (as Bribie has said). Not sure copper about poisoning, I think dont it affected has me at all..

Hi Slash, Something to remember, some of the HBS supply a freezer pack with yeast etc, which all adds cost, so they can find it hard to get postage prices down low. I dont think any of them try to actively make money from postage pricing. Also they will likely use at a minimum express post when...