Superoo
Well-Known Member
Howdy All,
As requested by a forum member, I have made up a sample of some tap labels.
Both are designed to fit under the handle top, and they have a 10mm hole pre-cut.
Several Colours are available...
Woodgrain with white text.
Black with white text.
Red with white text.
Yellow with black text.
Blue with white text.
There are 2 sizes at present...
SMALL (50 Dia).
$10 including Postage, or $8 ea for 5 or more.
Your Choice of text.
If you want a logo, add $10 and I will need a Black and White image - Not coloured.
LARGE (75 wide x 180 Long).
$15 including Postage, or $12 for 5 or more.
Your choice of text.
If you want a logo, add $10 and I will need a Black and White image - Not coloured.
NOTE- These large ones require bending with a heat gun, you can try with boiling water and it will work, but probably needs to be slightly hotter.
I could bend them, but that would cost more and then the postage would require a box instead of an envelope.
I will consider getting a heat gun and doing this if there is demand, but it would add $10 for bending, postage and package.
Any fancy stuff / funny shapes etc can be done, i would need to price each on its merits when not standard.
Cheers,
Chris
Small - 50mm Dia...
Large - 75 wide x 180 Long...
As requested by a forum member, I have made up a sample of some tap labels.
Both are designed to fit under the handle top, and they have a 10mm hole pre-cut.
Several Colours are available...
Woodgrain with white text.
Black with white text.
Red with white text.
Yellow with black text.
Blue with white text.
There are 2 sizes at present...
SMALL (50 Dia).
$10 including Postage, or $8 ea for 5 or more.
Your Choice of text.
If you want a logo, add $10 and I will need a Black and White image - Not coloured.
LARGE (75 wide x 180 Long).
$15 including Postage, or $12 for 5 or more.
Your choice of text.
If you want a logo, add $10 and I will need a Black and White image - Not coloured.
NOTE- These large ones require bending with a heat gun, you can try with boiling water and it will work, but probably needs to be slightly hotter.
I could bend them, but that would cost more and then the postage would require a box instead of an envelope.
I will consider getting a heat gun and doing this if there is demand, but it would add $10 for bending, postage and package.
Any fancy stuff / funny shapes etc can be done, i would need to price each on its merits when not standard.
Cheers,
Chris
Small - 50mm Dia...
Large - 75 wide x 180 Long...