Australia & New Zealand Homebrewing Forum

Help Support Australia & New Zealand Homebrewing Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
DJ_L3ThAL
Reaction score
1,454

Latest activity Postings About

    • DJ_L3ThAL
      DJ_L3ThAL replied to the thread Diagnosing gas leaks.
      2.6kg cylinder has ~1.4 standard cubic metres (1400 Litres). Carbonating at 4.5 g/L and closed transferring at a low pressure (you’ll...
    • DJ_L3ThAL
      DJ_L3ThAL replied to the thread Diagnosing gas leaks.
      That is correct. To hasten testing for leaks, I recommend an isolation valve immediately out of your regulator so you can isolate...
    • DJ_L3ThAL
      DJ_L3ThAL replied to the thread Pub Gas Sydney?.
      Commercial brewers carbonate their beer with pure CO2. The reason CO2:N2 (ie. "Cellamix" etc) gas mixes are used is because you need...
    • DJ_L3ThAL
      DJ_L3ThAL replied to the thread KegLand Questions and Answers.
      @KegLand-com-au what plastic is this kegmenter/unitank lid made from? It says "Industrial Plastic" but you are normally more specific...
    • DJ_L3ThAL
      Location? EDIT: N/m I see Sydney on your profile.
    • DJ_L3ThAL
      DJ_L3ThAL reacted to Dave70's post in the thread Turning Japanese. with Love Love.
      I also love free beer. (Well, of course its not technically free as I'm sure its baked into the cost of accommodation. But the...
    • DJ_L3ThAL
      DJ_L3ThAL replied to the thread Turning Japanese..
      I love Japan.
    • DJ_L3ThAL
      DJ_L3ThAL replied to the thread Brewery control options.
      I'd highly recommend not jumping the gun on something until you have worked through your objectives with the project/system. What are...
    • DJ_L3ThAL
      DJ_L3ThAL replied to the thread Brewery control options.
      Your Auber will unlikely be compatible, if you want automation you are best to but into BruControl hardware, or Raspberry PI / Arduino...
    • DJ_L3ThAL
      DJ_L3ThAL replied to the thread Brewery control options.
      Surely the controller can be fixed given likely just one component has failed? I'd look at refurbishing given you spent all that time...
    • DJ_L3ThAL
      DJ_L3ThAL reacted to KegLand-com-au's post in the thread KegLand Questions and Answers with Like Like.
      Yes I would tend to agree and the story seems a bit fishy to be honest with one person clearly posting a 4L keg then another person...
    • DJ_L3ThAL
      DJ_L3ThAL replied to the thread KegLand Questions and Answers.
      Hopefully an isolated failure and noone was injured... Is it being returned to KL for analysis/root cause findings?
    • DJ_L3ThAL
      DJ_L3ThAL reacted to KegLand-com-au's post in the thread KegLand Questions and Answers with Like Like.
      Yes they seem to be a fairly popular unit. We are just about to release a wine pump too with a 10psi pressure switch so you can feed...
    • DJ_L3ThAL
      DJ_L3ThAL replied to the thread KegLand Questions and Answers.
      Yep I got the first batch but it was returned to address some level-sensing issues (which are now resolved with the update). All good...
    • DJ_L3ThAL
      DJ_L3ThAL replied to the thread KegLand Questions and Answers.
      Upon checking even the OD’s are different, as are the lengths… Left tube 6.3mm OD x 3.6mm ID x 350mm Long Right tube (Gas?) 6.4mm OD x...
      • image.jpg
  • Loading…
  • Loading…
Back
Top