Reply to thread

Help Support Australia & New Zealand Homebrewing Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Message

I think I've got the 2nd gen version which by looking at the diagrams, the pump filter attachment is different to 1st gen. The little silicone pipe slides on and off the pump inlet quite easily so you can remove the filler for cleaning (as per instructions). But the other end of it which squeezes into the filter is the end that is giving me a bit of grief. I guess to preserve it, I'll leave it alone and just use a bottle brush to get rid of any trub caught in and around it.

[QUOTE="SmuggledBudgie, post: 1349997, member: 38001"] I think I've got the 2nd gen version which by looking at the diagrams, the pump filter attachment is different to 1st gen. The little silicone pipe slides on and off the pump inlet quite easily so you can remove the filler for cleaning (as per instructions). But the other end of it which squeezes into the filter is the end that is giving me a bit of grief. I guess to preserve it, I'll leave it alone and just use a bottle brush to get rid of any trub caught in and around it. [/QUOTE]

Verification