Search results

Australia & New Zealand Homebrewing Forum

Help Support Australia & New Zealand Homebrewing Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. W

    Propagating Yeast

    Pretty much do as the other guys. Did a Coopers starter a few weeks back - went into an amber ale type beer. Racked to CC last night and it tasted pretty good... I use a 1.5L Grolsch for my starters. 100g DME to 1 litre of water and boil/simmer for 10 to 15 minutes. Cool, mix the Coopers...
  2. W

    The Beer You've Most Enjoyed

    There's a thread currently running about who prefers which beer over what beer, and how bad is such and such commercial crap and how good is this particular brew. I was thinking that 'when' and 'where' you actually knock one back has a definate effect on your opinion as to the 'best beer'. So...
  3. W

    How To Use 50lt Keg To Brew With

    Ben, To release the pressure, cover the outlet with a towel or some old rags and push down on the valve with a screwdriver. Lota pressure in those things, so steady as she goes... Crackers, I was going to fit a s/s tap onto one of my kegs this weekend. Going to drill a 1/2" hole and poke a...
  4. W

    Silly Season

    Don't forget, even the worst beer in the world is the best one you've ever had if you've drunk nothing else... Thing is, it's like asking whether its possible to run the 100m any faster. Surely its not possible to brew a better stout than Guiness? Someone surely doesn't make a better bitter...
  5. W

    Dreamchasing?

    Well done, Wasabi. There aren't many with the balls to pack up a well paid job and start again. And full marks to SWMBO. There aren't many women who would even consider supporting that sort of decision. Keep us posted on your progress.
  6. W

    If You Could Do It Again

    How about a 20L tea urn as a boiler and a cheap and cheerfull 25L esky for mashing. You can use any old pots to take your sparge water to temp on the cook top. Fixing a tap into the esky can be a pain in the arse. Difficult getting a seal sometimes, but neoprene washers seem the go. I made a...
  7. W

    Why Rack

    Whoa, two contradictory opinions here from a couple of the experts. Post Modern reckons rack into secondary to prevent problems re autolysis and Jovial reckons that 2 weeks in primary is okey dokey, backed up by White Labs. I must admit I've always done the first and it's the first time that...
  8. W

    Sg Not Dropping!

    I'd say it was done, too. But what I would do at this point is rack to a sealed jerry and leave it for a couple of weeks to settle out further - ideally in the fridge, and then bottle. If it doesn't go into the fridge, crack the top every week or so just in case there's a point or two of...
  9. W

    What's Your Brewery Named?

    Still in the process of setting up the main brewery, but I was thinking of a name only last week. There's a brewery back in the old country (Old South Wales as opposed to New South Wales) called Buckleys. They brew real ale and Jeezus, it's good stuff if you like the British type bitters. The...
  10. W

    Sarah Hughes Dark Ruby Mild

    JM, What's the idea of simmering as opposed to boiling?
  11. W

    Cheap And Effective Sanitisers

    I've been using bleach to keep my beer bottles sweet. Bought some unscented bleach from the local supermarket - cheap as chips - and mixed up a solution in a spray bottle. Should be 0.24% hypochlorite solution (that's 60 ml of bleach, which is normally 4% Sodium hypochlorite, in a litre of...
  12. W

    Size Copper For Cooler Coil

    To cool 15L down to pitching temp (with a coil made up of about 10m of 1/2" copper) I run the water quite slowly - takes about 30 minutes and uses about 30 to 40L. The first 20L is quite warm, so I use that for cleaning. The rest goes to the garden.
  13. W

    Stainless Steel Keg For Boiler?

    Gough, Just did 3 of the 50L kegs myself on Saturday. Pretty simple - a lot easier than I was expecting. Used a 100mm metal cutting disc on the old grinder and I did the 3 of them in about 45 minutes. Used 2 discs in total. I didn't take the whole top off - just cut a 300mm dia hole in the...
  14. W

    New Guy Question

    Welcome aboard NewBB. 'Is there some technique i could use to store the whole batch and still complete its process and once ready bottle it as i need it?' If I read that last part right, you may be proposing to just bottle a few at a time. Assuming that you've got close to, say, 20L of beer in...
  15. W

    It's A Boy!

    Well done and congrats...
  16. W

    Aerating Your Wort

    I bought a handgun style gizmo for the garden hose recently. It has to be the best thing ever for cleaning out your equipment. Really high pressure narrow jet for removing those stuck on bits and pieces and cleaning bottles and a fine spray for rinsing all the gear. But does it ever aerate your...
  17. W

    What To Do Now ?

    I'm hoping to follow Browndog into kegging in the new year - here's an additonal question for the experts: Does anyone naturally condition beer in the keg? That is, bulk prime, keg, let the pressure build 'natually' and just use bottled CO2 to keep the pressure topped up. Is there any advantage...
  18. W

    Introduce Yourself.

    Fora? Bloody hell, Murray - we'd better watch the grammar from now on... What's happened to the Broncos, mate? We need a strong side North of the border for State of Origin. Will it be the Cowboys supplying the bulk of the team? Wish we still had Matty Sing. Better luck next year, Gough.
  19. W

    Introduce Yourself.

    How's it going guys? I'm Wozza from Bondi, originally from Wales. Work as a Cad Manager for a building services consultant in Chatswood, Sydney. Happily married with a 14 year old son and a 22 year old daughter, who's off to the UK next week for a look about. I used to brew a fair amount in...
  20. W

    So Wot's The Story Behind The Handles

    I'm originally from Wales (not really looking forward to the World Cup), became an Australian citizen about 6 years ago. Therefore, I 'wozza' Welshman, now I'm an Aussie...
Back
Top