Search results

Hi Malt Junkie Nah, I do not understand.... The SSR was certainly not tough to fit. It has 4 legs and I just connected short lengths of wire and heat shrink to insulate then pulled the relay out of the board and put the wires into the holes where relay used to be. As it is only switching the...

Hi Claypot The scrambling was really sorted in these kits. Generally by separation of wiring and the snubber cap and resistor on the board. I use a chugger too. In mine i actually fitted a small SSR and removed the relay from the board. I took photos and documented and posted it on AHB...

BSC Motion Technology Australia Warehouse 37 Heathcote Road Moorebank, Sydney Australia, AU Show Map Phone: 011-61-29-824-2099 Fax: 011-61-29-824-2145 Products: Couplings & Power Transmission

Hi Husky A couple of options. Choose one of the ebay ones with correct size on one side and then drill out other side to suit. The shaft with 3 flats can be fitted to with a round fitting and a single grub screw. Likewise the shaft with a key can also use a grub screw. A coupler could be...

Hi Camo6 Who does a metal hopper? I too have the plastic hopper and while it works I fear I will drop it and it will not bounce. Thanks james Sent from my iPad using Tapatalk HD

Hi NealK Possible you blew the display too? I got my display on ebay and one from RS components and more as well. They all work except when you blow them up of course. With boxes it is hard to say what the problem is. Could be the display could be the software. I would suggest checking the...

Hi Nealk Did you edit the options before compiling the file and downloading to the arduino? You get to choose 2x16 or 4x20 and language and the board type etc. What do you see on the display? Mind you I swapped mine for a 4x20 and the difference is great. Note there are some bugs in the...

Hi Les the wise guy See post 655 pne page back. The ebay one is. 1/3 the price and does the job no worries. James Zwitter Sent from my iPad using Tapatalk HD

Hi NealK Yep that one is the correct one. James Zwitter Sent from my iPad using Tapatalk HD

Hi Dubzie I had a split with Judanero and I paid him as he had paid for the whole 10 kg. I understand he only picked up 5kg and advised you the rest was for me? Thanks james Zwitter Sent from my iPad using Tapatalk HD

Hi 12mm aluminium rod as a shear pin, ha ha ha! The shear pin has to be strong enough to handle the load but weak enough to shear when the load is exceeded. I used the hole in the motor drive where the shaft connects as the easiest place and just used a 2mm hole in the shaft and then tried...

Hi I too bought 10 seconds in the last bulk buy and they are fine I think many were yellow not white but they are clean and do the job. The grain has not complained. James Zwitter Sent from my iPad using Tapatalk HD

Hi Mikeyr Can you put me in for 10 x 20 litre pails with lids please. Sorry cannot edit the page on this device. James Zwitter Sent from my iPad using Tapatalk HD

Hi. BIgmacthepunker Yeah love it. Makes some odd noises when it hits a small stone and I use 2mm stainless welding ros as my shear pin and have broken a few times but would hate to get a finger in there as I think it would hurt. I put voltage and current meter on and it has hit about 15 amps...

Thanks n87 Ok anyone else heading to pick theirs up? and lives north side of Sydney? Could pick my 5 Kg up for me? thanks james Zwitter

Hi Judanero (Justin) I may be interested in one of the 30 litre units if can grab it in Sydney before it gets to Newcastle. If that will keep your order on track. Do I have to change my name to Gap? Bulk buys are a pain to organize. Only once the money is in the account and the order...

Hi n87 When are you picking up? I have a 5 kg split from Judanero (Justin) that I have paid him for. any chance you can pick that up while you are there? I do work in Maquarie Park / North Ryde. Please? , with hop flowers on top? thanks james zwitter.

Hi Kingy I bought the ebay cheapy from China and a spare but it has been rock solid performer. The alignment on mine is poor but it works really well any way...

Hi DJ Found where I got the sight glass. https://www.brewershardware.com/1.5-Tri-Clover-Compatible-Process-View-Sight-Class.html I made a big order when the dollar was at parity and got 2 butterfly valves and a few other bits. never seen this particular type of sight glass on the Chinese...

Hi Dj Ok the IPA is in the kegs Here are the photos of the looking glass I use on the top of the chronical7. Will find where it came from shortly James Sent from my iPad using Tapatalk HD