Search results

Yes the CellarScience yeast has been selling really well and already quite a few of them have sold out. The brand is owned by MoreBeer in America and they have been selling this brand for some time in Americal already where it's already earned quite a good reputation. I think it's great value...

The OD of the tube is the same. We do have different diameters of the flexible tube that connects to SS tubes. Is that what you are talking about?

Yes I believe so. We have made some good advances on this front and the tooling is getting close to complete so I hope we have this being sold before christmas.

Thanks for that sp0rk. I would agree the only good seltzers that we have made are with the neutral alcohol/vodka so far. I am wondering if it's just you and me or are other customers purchasing the seltzer kits and getting better results than we are? Has anyone else been able to ferment a...

We have had a relatively disappointing experience with seltzers so far which is why we have not put any seltzers on our website but we are keen to get your feedback on this topic. Obviously the seltzer market has grown a lot but even from many of the customers that we have spoken to none of...

Xylotol is not a bad option. To be honest all the artificial sweeteners have their pro's and cons. Some of them have a bitter taste when used in higher concentrations and others have a short bitterness that doesn't contribute the mouth feel. If you really want to mimic sugar I think it's...

Would it be to much for you to get the parts back to us. This way we can refund you or replace the parts but more importantly have a look at how you are putting them together so we better understand the issue. Also what was your order number? The duotight fittings require a couple critical...

Obviously I am a little biased as we sell the duotight fittings around the world and have sold many hundreds of thousands of these and are broadly seen as a reliable fitting. If however you have a leak can you please send the fitting back to us for investigation so we can better understand how...

Yes I am not a massive fan of the sucralose. If you are kegging then you really do not need it as you can force carbonate and add FermStop to prevent the beverage from continuing to ferment. On the other hand if you are going to bottle condition you need some way to prevent the sugars from...

Most regulators have a 1/4 thread in the body of the regulator so this is probably the part you need: https://kegland.com.au/products/duotight-6-35mm-female-x-bsp-male-bulkhead Alternatively if you wanted to use the MFL thread then you can use this combination of fittings...

Yes I believe that is correct. To my understanding Buderim specializes in Australian grown ginger that is mostly young ginger that has more juice and has good ginger aroma but for the spicy notes that you get from the gingerine and oleo-resins you need to use the "Old Ginger" that gives you that...

Hey guys. We are looking for some feedback on this new ginger beer recipe: https://kegland.com.au/products/hard-blunderburg-ginger-beer-kit As you can see this is a "no ferment" product. The alcohol comes from a new neutral alcohol base that we are also selling on the website called "VINKA"...

We are just about to release a new product that we would like you to try out. It's quite a different method of making ginger beer. The instructions are quite similar to this Hard Solo recipe: https://kegland.com.au/products/hard-pub-squash-keg-kit We will have a ginger kit like this very soon...

This has already been released. So if you try and make a new profile now and have an alert that is a certain number of minutes into a step

No worries IanW. Let us know if we can assist with anything else.

It might be worth noting that if you set the temp to 4C that doesn't mean your beer is 4C. For instance your temp controller will only start cooling when current temp = set tup + hysteresis setting so if you have your hysteresis setting is 3C for instance then it means your compressor will...

If you have thrown away the bonnet and adjustment knob on the front of the regulator this does make it difficult for us to assist you. Can you send us your order number? Did you contact our customer service team about this at the time?

Also we will happily pay for the return postage. Can you please send us your order number and we will get the regulator back to us for diagnosis and then we will post the results on the forum. If the regulator is actually faulty then we will replace it or repair it for free.

https://www.kegland.com.au/products/mk4-regulator-type-30-co2-gas-dual-gauge-multi-gas-includes-8mm-x-ffl-duotight Which model of regulator did you have? Is it the one in the link above? KegLand has a 5 year warranty which is longer than the Harris and Micro-Matic and as kegland is only 6...

https://www.kegland.com.au/products/rapt-digital-regulator-spunding-valve Sorry this should work