Australia & New Zealand Homebrewing Forum

Help Support Australia & New Zealand Homebrewing Forum:

S
Reaction score
1

Latest activity Postings About

    • S
      starkers reacted to iamacup's post in the thread Canberra 2-MIB and Geosmin event with Like Like.
      My brew seems fine to me, I’d just go for it.
    • S
      Sorry you didn't get answer Cup, I'm in the same boat of being insensitive to it but I've read that acid helps, so maybe normal mash pH...
    • S
      starkers replied to the thread Another CO2 leak.
      Makes sense. In my head most of the mols were on the high pressure side so the low pressure side should drop faster once high pressure...
    • S
      starkers replied to the thread Another CO2 leak.
      I see your point and I did have some trouble getting the FFT-duotight adapters on my manifold and reg to stop leaking (lots of talk...
    • S
      starkers replied to the thread Another CO2 leak.
      Thank you all for your suggestions. Touch wood it seems to be holding pressure now. I replaced the post o rings, it still leaked, I...
    • S
      starkers reacted to golfandbrew's post in the thread Another CO2 leak with Like Like.
      And you have sprayed soap all over the QDs, posts, and duotights? If it's s a small leak either mist of soapy water or spounging with...
    • S
      starkers reacted to mynameisrodney's post in the thread Another CO2 leak with Like Like.
      I've had a leaky QD that had a scratch on the inside of it before. Pretty sure that was letting gas past the O-ring. No idea if it was...
    • S
      starkers reacted to hotwaterpls's post in the thread Another CO2 leak with Like Like.
      I'm not sure about the new duotight disconnects, but the standard disconnects (barb or MFL) have I think three o-rings including two in...
    • S
      starkers replied to the thread Another CO2 leak.
      Thanks, yeah I've tried all 5 gas QDs that I have on hand on each keg, with three sealing on both kegs and two leaking on both kegs...
    • S
      I've run into some strange gas leaks on my new kegging system. I resorted to starting from just the reg and reconnecting one thing at a...
  • Loading…
  • Loading…
Top