Recent content by Olut

Luckily I have a friend who is a welder :) The welding and polishing was a lot of work, I would recommend the use of Triclover fittings where possible to make it easier. All up the costs were about $800 for all the materials and laser cutting. It could be decreased by the use of triclover...

100% Built from 316 Stainless steel, got the flanges laser cut and holes in the pipe laser cut also. One thing I would recommend is bigger diameter pipe... it's hard to do up fittings from inside an 80mm diameter!

Just by way of an update: I've done some more work towards building this design. I haven't drilled the holes yet, but here the font is in place.

The taps themselves will stick forward a fair way by nature of their construction :) I hope it's not too much of a load for the freezer - I don't want to kill it!

This is a first post, hi all! I am currently designing a 4 tap keezer for a freezer that I bought off eBay. To start off with, I modeled the freezer dimensions. My freezer had sliding glass doors which are removed in the design. In terms of kegging, the freezer will hold 5 kegs plus CO2 (I...