Reply to thread

Australia & New Zealand Homebrewing Forum

Help Support Australia & New Zealand Homebrewing Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

actually thinking about this - whats stopping use from using a fridge with say 60L of glycol and a manifold some tubing and solenoids combined with some STC-1000s to control the temp to several of these? Obviously you'd have to wrap the tubing with glycol around the fermenter then insulate it. Might need a heater belt (although probably not)

The STC-1000 could control both a pump and a solenoid to make sure the pump is running when the solenoid is opened. Would require a diode or two and/or a couple of relays.


Back
Top