Reply to thread

Help Support Australia & New Zealand Homebrewing Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

If you have bought, sold or gained information from our Classifieds, please donate to Aussie Home Brewer and give back.

You can become a Supporting Member or click here to donate.

Message

Evening Gents,
I have an adaptor that you can fill from any co2 cylinder, cant remember if it has two type 30 threads and need the soda stream adaptor or it has one type 30 thread and one aus sodastream.

Simply screw onto cylinder, screw in sodastream, open cylinder, fill, then shutoff. It has a small needle valve to release pressure.

Cost me $70, yours for $50 ben_sa if you want?

Caney

[QUOTE="caney, post: 1510965, member: 38868"] Evening Gents, I have an adaptor that you can fill from any co2 cylinder, cant remember if it has two type 30 threads and need the soda stream adaptor or it has one type 30 thread and one aus sodastream. Simply screw onto cylinder, screw in sodastream, open cylinder, fill, then shutoff. It has a small needle valve to release pressure. Cost me $70, yours for $50 ben_sa if you want? Caney [/QUOTE]

Verification