Reply to thread

Australia & New Zealand Homebrewing Forum

Help Support Australia & New Zealand Homebrewing Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

* Not an electrician *


Looks sensible to me. My preference - if you are going to call it an 'E-stop' - is to isolate at the incoming lines rather than the feed to the contactors. If one of the contactors crapped itself and melted closed the e-stop won't work. You could only isolate the active but leave this up to your sparky mate to determine, he'll know the standard/s and best practice.


Back
Top