Reply to thread

Australia & New Zealand Homebrewing Forum

Help Support Australia & New Zealand Homebrewing Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Probably getting a little bit off topic...


Can the Brau system be set to have a slow ramp rate?  It's something I'm going to play with once I finish my control panel build as I will be including a ramp pid.


So the idea say for a beer style as above


55 for 5min

Ramp to 62

62 for 15min

Ramp from 62 to 72 over 30 mins.  * So you are getting about 3 minutes at each step temp, we could even try 40mins to slow it a bit more

72 for 15min

Ramp to Mash out etc..


Looking at the schedule it may be a bit thinner than the OP wants, but the idea is bulk of the conversion is on the fly.


Back
Top