Search results

Agreed.. Transparency is great and all, but just give a date that gives you enough time to "get around to it"

True, they all crimp a seam twice right? This was the other one.. https://imgur.com/a/U7FfteE

Soz, have to chime in on this.. I enquired about this to KL and got a reply direct from Kee who sent me pics and pricing of the units they had. Indeed they looked totally different to the one sold today. Not sure why this is a big issue though as they never said that it was the one they would...

This 100%

aaaaaaand the cans are out of stock.

I would be interested in the seamer, cans, and bottle filler gun + power supply. Its a bit of a weird expense the power supply seeing as its required and there isn't a link to it on the cannular page.

Are there plans to stock other can types? 375ml what DazGore said ^^ also different lids? I would be interested in pulling the trigger on getting this machine but don't want to be 'locked' in to a specific can type being the current 500ml with full aperture. The smaller opening lids would be...

If your intersted and if you ever come up Sydney city (McMahons Point) way i have 8 15L empty All In brewing FWK drums. I need to get rid of them. I will be sending over to the recycling centre at some point otherwise.

Agreed... I weigh everything that comes in, online or lbhs and have never had an issue.. Some of my recipes just happen to need 100g hops, i purchase 100g which i trust equal 100g.. Cheeky Peak, Daves, Hop & Grain, Random ebay sellers etc, no issue. 10%? I would be wanting to make that more...

Alrighty, A bit of KL criticism. TL;DR: Too much stuff out of stock or misleading on the site in terms of availability. Gets really frustrating when you have a cart full of stuff and the one thing you need to complete the whole package says its in stock on one page but in reality is out of...

Shoot a warranty request over to Kegland, mine seals perfectly, even without the screw in it.. There is probably a seal in there thats not quite right on yours.

3v

Ive got the 91L Cheeky Peak pot and have an elbow pickup that hovers a couple mm from the bottom. Anything left below the tap still siphons out until about 0.5L - 1L (plus whatever the hops absorb) which is left behind. see pic below of pickup (during lautering through whirlpool port) A good...

My personal preference would be just to get a chiller.. For the price of 3 cubes from bunnings... https://www.kegland.com.au/wort-heat-exchanger-counterflow-chiller.html Throw it in the fridge to pull it down the rest of the way and pitch an hour or two later..Your then done and dusted for the day.

I would take that fermenter off your hands today... buuut i live in sydney :(

Not sure why you need to disconnect during the carbonation period, your essentially performing a "set and forget" carbonation but with more work.. Is there a limit on the number of gas lines you have to attach 100% of the time? The beer will only carb up to 12psi and no more hence why most...

I have a stainless liquid all lock disconnect that i cleaned the other day... Unfortunately I lost the seal that sits in between where the disconnect screws apart at some point (only noticed when beer was leaking all down the keg). Anyone know if i can get a replacement without buying the...

https://www.gumtree.com.au/s-ad/1156224059 Pretty good for a 30L pot and immersion chiller.. Free! (South East Sydney)

woodynet, I generally set my mini reg to 10psi or the first notch on the gauge. Anything higher than than gets a bit too foamy. Experimentation is key with the mini reg as it took me a while to find the right pressure. Also if have found that it takes around 5 mins for the reg to equalize...

I found the pack online.. Its the middle fitting at the top. I attached it to the reg with some thread tape and an O ring to seal. http://www.bunnings.com.au/project-air-inflation-nozzle-adaptor-pack-_p6270249 That was just an easy solution i found, there are other fittings around but this one...