• If you have bought, sold or gained information from our Classifieds, please donate to Aussie Home Brewer and give back.

    You can become a Supporting Member or click here to donate.

WtB: Brissy - Looking for gear for new 2V setup (Rims Tube/Stock pots/

Australia & New Zealand Homebrewing Forum

Help Support Australia & New Zealand Homebrewing Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

kwinchee

Well-Known Member
Joined
19/12/04
Messages
86
Reaction score
7
Hi peeps

Im looking for some things for a new build i'm planning. (2v RIMS/enhanced brutus 20)

Need the following to keep the troops going and am on student budget

-2x 80-150lt SS stock pots (hopefully one with a falsey)
-A nice pump for recirc of an 80-100lt mash
-a rims tube 2400-3600w would be fine

I have a biab setup that I will be looking to get rid of soon - (40lt urn/SS mesh bucket/Pump and camlock fittings) that is perfect for 20lt brews if any interest in a swap

Churs
 
A hx of 2400 - 3600w will maintain a mash of that size, but ramping will require way MORE POWER! So single infusion will be the way to go. I'm planning a system of similar size and plan to use the same size electric hx (herms). To enable step mashing I'm going use a SS convoluted counter flow chiller recircing the hlt through it to boost hx for ramping. Obviously you need 2 pumps, and also an hlt. The hlt is stored energy and therefore the size of element in that vessel is less important.
 

Latest posts

Back
Top