Sold Full custom system - (SOLD)

[#bewlife]

I have a custom built system that has been packed up on a shelf for over 12 months and need the space. Ive got all the pieces to either set this up as a 3v or 2v system and my build notes to assist with the linux side of things.

EDITED POST - Itemized list and more photos provided. Will add remainder of photos in replys

Includes:

1	x	Craftbeer Pi - Custom Control Panel	10amp circuit input - Powers computer, pumps, fermenter 20amp circuit input - powers 4500w heating element Safety switches for each circuit Rasperby Pi AC/DC Converters Relay Board Quality Wago Connectors Quality color coded neutic connectors rated at 20amp Have a box of spare electrical componenets left over
1	x	4500w Heating element	Prewired to neutic connector 2.5" triclamp
1	x	S304 counter flow chiller	1.5" triclamp wort inlet/outlet 0.5" male camlock water inlet/outlet can be reconfigured
1	x	SS304 false bottom to suit 70L pots	445mm outside diameter 65mm high
1	x	SS304 hop basket
1	x	70L Mashtun	465mm outside diameter 465mm high Insulated with 10mm thick formshield sides, top and bottom 1.5" Bulkhead at top (Recirc - have eithier auto sparge or lock line) 1.5" Thermowell bulkhead in side to sit below false bottom 1" Center bottom drain hole promotes even suction through grain bed
1	x	70L Kettle	465mm outside diameter 465mm high Insulated with 10mm thick formshield sides, top and bottom 1.5" Bulkhead at top (recirc - have the whirlpool attachment) 1.5" Thermowell bulkhead in side 2.5" Heating element bulkhead in bottom side (suit element above) 1" Off center bottom drain hole promets whirlpool
1	x	SS304 mash paddle	880 long
2	x	SS hose floats	suits 0.5" silicone hose
2	x	1.5" sample points	suits 1.5" triclamp
1	x	2.5" triclamp bulkhead
1	x	1.5" triclamp to 0.5" threaded through tank fitting
1	x	1.5" triclamp bulkhead
8	x	1.5" triclamp to 0.5" hose barb	to suit 3/4" hose
3	x	1.5" triclamp to 0.25" hose barb	to suit 1/2" hose
4	x	1.5" triclamp to 0.5 femal thread
2	x	thermowell connectors
1	x	bag of triclamp seals	Silcone is more forgiving than the rigid seals
1	x	1/2" locline recirc	with 1.5" triclamp connector
1	x	25mm whirlpool dropper	gets below wort level and creates nice whirlpool 1.5" triclamp
6	x	100mm long 3/4" sspipe	1.5" triclamp
2	x	150mm long 3/4" sspipe	1.5" triclamp
2	x	200mm long 3/4" sspipe	1.5" triclamp
2	x	300mm long 3/4" sspipe	1.5" triclamp
8	x	0.75" equal tee	50mm x 100mm 1.5" triclamp
4	x	0.75" 90 degree elbow	50mm 1.5" triclamp
4	x	1" to 1/2" reducer	85mm long
1	x	0.75" equal cross	100mm x 100mm 1.5" triclamp
42	x	1.5" triclamps
8	x	0.75" butterfly valve	1.5" triclamp sanitary
2	x	0.75" 3 way ball valve	1.5" triclamp
2	x	0.75" diaphragm valve	1.5" triclamp
2	x	0.75" sight glass	1.5" triclamp
1	x	24v to 12v ac-dc converter
2	x	65watt mag flow pumps	steel heads and 1.5" triclamp connectors
2	x	kegland pids
1	x	mashmaster mill master mill and hopper
1	x	high tourq mill motor
1	x	Magnetic stirer
2	x	boxes misc brewing stuff	heat belt, fittings, auto sparge, refractometer, ph meter, chemicals, bubblers, caps
1	x	bottle capper
1	x	bunch of " threadded stuff	25w mag drive pumps with steel heads (bit old looking but serviceable) fittings, camlocks, thermowells, elbows, tees, hose barbs, nipples, etc ball valves
2	x	kegland heating elements
1	x	pond pump

Id like to keep things together as much as possible but if something interests you as an individual item let me know.

Message or text me 0406587430

 

[terminal2k]

for it how much want do you

 

[#bewlife]

for it how much want do you

bet that sounded funny in your own head while reading a homebrew classifieds drunk and alone at midnight. so much winning.

 

[terminal2k]

its only funny if you read it in Yoda's voice. but as you're open to all offers I offer 20 cents

 

[#bewlife]

more photos

 

[#bewlife]

more more photos

 

[#bewlife]

more more more photos

 

[#bewlife]

more more more more photos

 

[#bewlife]

95% of this got sold in one go. Will repost the sh1ts and bits left over on separate thread

 

[hotwaterpls]

95% of this got sold in one go. Will repost the sh1ts and bits left over on separate thread

@#bewlife Any update on the leftover bits?