• If you have bought, sold or gained information from our Classifieds, please donate to Aussie Home Brewer and give back.

    You can become a Supporting Member or click here to donate.

WTB: Font taps

Australia & New Zealand Homebrewing Forum

Help Support Australia & New Zealand Homebrewing Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

b00ner

Active Member
Joined
15/11/10
Messages
34
Reaction score
6
Location
Geelong/Melbourne - VIC
Hi all,

After some font taps for a cheapy font I managed to get my hands on. Happy to take a font too if someone wants to get rid of the lot. Looking for 3 taps but just interested to see if anyone is trying to get rid of any.

Cheers,

Andrew
 
pics, please. What sort of adaptors does the font have?
The amount you have to spend on the taps and the type of adaptors could be the limiting factor.
Also, it helps if your profile has a suburb/state.
Thanks, Andrew.
 
Font might be a stretch, more stainless tube with 3 holes and a bolting flange.

s-l1600.jpg


Haven't measured the holes but just wanted to see what anyone wanted to offload and then I'll work out a way to fit them.
As for location, I'd hoped Melbourne and suburb would be enough but will add state for clarity :) (have moved since so needed an update).

Cheers!
 
20160922_104518.jpg20160922_104529.jpg

Hi All..

was wondering if anyone out there had any Lancer Taps laying around as I have a Cobra font with 3 outlets, please see pics attached as the taps have a barb on they to locate in the fitting.

thanks
Chris
 
Think they are just standard snaplock fitting mage should be able to get an adapter for the type of tap you have..
 
ziggy459 said:
attachicon.gif
20160922_104518.jpg
attachicon.gif
20160922_104529.jpg

Hi All..

was wondering if anyone out there had any Lancer Taps laying around as I have a Cobra font with 3 outlets, please see pics attached as the taps have a barb on they to locate in the fitting.

thanks
Chris
Chris, you are looking for pushloc (iirc) taps, as the recess in the tap adaptor accommodates a pin in the tap base, that prevents the tap from spinning in the fixture.

Took me a while to find some of those for my two cobra fonts, but you might be lucky and someone here can help you out. Otherwise, keep an eye on eBay.
 
I'll have my 5 tap font up 4 sale shortly.
 
Back
Top