Weekend Project - New Stirplate

Australia & New Zealand Homebrewing Forum

Help Support Australia & New Zealand Homebrewing Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Filby

Well-Known Member
Joined
7/10/10
Messages
163
Reaction score
3
Had a few hours to blow in the shed this weekend so decided to replace my existing stirplate as it just didn't have the grunt to swing the large stirbar.

I have available in my shed a lathe and mill so it makes creating balanced items pretty straight forward.


The magnet spiny thing.
IMG_1180.JPG


PC power supply case gutted. Made up a 12v modulated pulse width speed controller. 12v window winder motor. 12v, 1.5A transformer. Used existing 12v fan for cooling motor and mains power switch and plug.
IMG_1184.JPG


Mill chomping through the delrin. Such a pleasure to machine compared to steel or ali.
IMG_1190.JPG


Machined top plate with motor mounted.
IMG_1181.JPG


Completed stirplate.
IMG_1191.JPG


In action on low setting.
IMG_1193.JPG


On medium it beats air into the liquid. Much faster and the balance of the stirbar flings it off.
IMG_1194.JPG



Fil
 
I reckon you should go into production with that ;)

Like to see what it does to a 5L starter
 

Latest posts

Back
Top