Wanting to buy snaplock fittings

Australia & New Zealand Homebrewing Forum

Help Support Australia & New Zealand Homebrewing Forum:

Joined
2/12/09
Messages
9
Reaction score
0
Hi All,

Looking to buy 4 snaplock fittings - I have the taps and the fonts but I am missing the bits that go between the font and the tap. Link to the product with a picture: http://www.craftbrewer.com.au/shop/details.asp?PID=827

Hopefully someone has one or two (or four) lying around in the shed - they're pretty expensive when new, more expensive than the taps!

:beerbang:
 

vortex

Well-Known Member
Joined
25/10/11
Messages
412
Reaction score
19
Danielby said:
Hopefully someone has one or two (or four) lying around in the shed - they're pretty expensive when new, more expensive than the taps!
Sure about that? Andale sell snaploks for $50ea, their taps are more than that, especially if you buy Florytes or DAs.
http://www.andale.com.au/snaplok-adaptor
 

Batz

Batz Brewery...Hand crafted beers from the 'Batcav
Joined
8/8/03
Messages
12,729
Reaction score
1,415
I'll let you in on a little secret Daniel, your not going to get these cheap.

Batz
 

Smokomark

Well-Known Member
Joined
30/9/11
Messages
536
Reaction score
93
Pretty sure i've got a few spare in the shed. I'll have a look later today.
 

zindello

Active Member
Joined
1/1/13
Messages
44
Reaction score
0
Location
Wyndham Vale, Victoria
I have a pair of these on a Font that I'm currently trying to get rid of. I only want $40 for the font and the fittings ...
 
Joined
2/12/09
Messages
9
Reaction score
0
Gryphon Brewing said:
I have a few used ones if you are interested ?
Nev
PM'd :)

Love your work Nev

zindello said:
I have a pair of these on a Font that I'm currently trying to get rid of. I only want $40 for the font and the fittings ...
That sounds like a good deal for somebody but I already have my font - it's one of those 6 tap flooded knock-offs. Thanks anyway though


smokomark said:
Pretty sure i've got a few spare in the shed. I'll have a look later today.
Please let me know how you go - If you find some I'd be keen to exchange finances for fittings!
 

flyinhi

Well-Known Member
Joined
1/8/10
Messages
46
Reaction score
2
Danielby said:
PM'd :)

Love your work Nev

That sounds like a good deal for somebody but I already have my font - it's one of those 6 tap flooded knock-offs. Thanks anyway though


Please let me know how you go - If you find some I'd be keen to exchange finances for fittings!
I'm also looking for 1 only 1/2, snaplock panel adapter to complete my kegerator, so after the OP i'll be next in line for a left over one!
I went ahead and started a new thread, then found this one, sorry for doubling up.
 

Westaussiebrewer

Well-Known Member
Joined
29/7/12
Messages
49
Reaction score
1
i was given a few of these with a keg i was given but they just sit in the shed im not sure what condition there in or even if there any good but your welcome to them if you like for the cost of postage or a bottle of your finest.

the other option is ill be down in perth end of the month if you wanted them then ?

up to you
 
Joined
2/12/09
Messages
9
Reaction score
0
Westaussiebrewer said:
i was given a few of these with a keg i was given but they just sit in the shed im not sure what condition there in or even if there any good but your welcome to them if you like for the cost of postage or a bottle of your finest.


the other option is ill be down in perth end of the month if you wanted them then ?


up to you
Thanks very much for the kind offer! I got all four from Nev but thanks anyway. I'm sure someone can make use of those though!

Gryphon Brewing said:
I have a few used ones if you are interested ?
Nev
Nev, you are a deadset legend.

Here's the setup photo (5).JPG
 

pk.sax

RIP bum
Joined
19/8/10
Messages
4,362
Reaction score
415
Hmnnnnnnnn. Fancy this, trolled eBay, a brew shop and the general web and nothing and come back to AHB and it's all here!

I'm after two snaplok tap adapters. i.e., the bit that screws into a normal beer tap -brumby/perlicks and snaps into the female snaplok fitting on the font. Anyone got some?
 

PeteQ

Well-Known Member
Joined
16/2/12
Messages
178
Reaction score
21
practicalfool said:
Hmnnnnnnnn. Fancy this, trolled eBay, a brew shop and the general web and nothing and come back to AHB and it's all here!

I'm after two snaplok tap adapters. i.e., the bit that screws into a normal beer tap -brumby/perlicks and snaps into the female snaplok fitting on the font. Anyone got some?
I'm about to put up a massive stack of crap up for sale including some snaplock fittings and tap adaptors. I'll put 2 aside for you if you'd like?
 

Latest posts

Top