Wanted Co2/Nitrogen Tap

Australia & New Zealand Homebrewing Forum

Help Support Australia & New Zealand Homebrewing Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

STEVENALI

Well-Known Member
Joined
26/6/04
Messages
165
Reaction score
5
Hi Guys I am looking for 1 or 2 of these taps or the modern equivalent (that is a C.P. fitting it is going into) the one shown here has a slight leak and runs my Guinness keg at 260 KPa so I prefer not plastic. home brew companies no worries.
Nitrogen gas tap.jpg
 
If you want the best ones (no leaks) Micromatic make a M&F shutoff valve in both 1/2" and 5/8" it would go between the keg coupler and the 5/8 X 3/4 reducer in your picture.
I think Andale stock them, or you might be able to get it from Micromatic direct.
Mark
1586398552601.png
 
Thanks they look like they would be perfect, if only Andale would answer my email order.
 
Back
Top