Vic Floor Malted Barley - EOI

Australia & New Zealand Homebrewing Forum

Help Support Australia & New Zealand Homebrewing Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Yob can you please take of the list if that's O K.I have to move house again.
Until my new place gets built I have no room
Thanks Cheers Mario
 
Yob : 1
AJ80: 1
Rob.P: 2
Professional_Drunk: 1
Buckerooni: 1
Mardoo: 1
DU99 : 1
Danwood: 2
Idzy: 1
SimoB :1
CrookedFingers : 1
slcmorro: 1
Dips Me Lid : 1
Black n Tan: 1
CrazyOldGuy: 1
djar007: 1
Crouch: 2
mofox1: 1
Whiteferret: 2
Mall: 1
Roller997: 1
Longlostbelgian: 1
Fort Monty : 2
AndyD :1
MashBasher : 1
Prince Imperial: 1
Jack Truelove: 1
Porkchop: 1
WillCowan: 1
Sim76: 1
Syl: 2
Sim76: 2

Total: 39

Removed Mario by request,

One bag available.
 
Hey guys, just wanted to give you a bit of an update on what is happening down here. I'll post this message in all three threads too.

Things are still progressing, just not as I had hoped. I've hit a snag with my main investor so have had to have a bit of a rethink of my process and a slight change of plans, mainly with the kiln design. Basically I now have a smaller kiln but will be running it more often. As I am designing all this equipment myself and having it built locally, it means there has been a bit of delay in the building of the kiln which is essential to getting production up and running.
At this stage we are now looking like late November or early December.
My apologies for any inconvenience this may cause but rest assured it is definitely still progressing!
 
Pretty sure we all understood the delivery date was "this year-ish". Thanks for the update. Bummer about the kiln but sounds like you're Rollin' with the punches. Good luck.
 
Hi Yob, I'd be keen to take the final bag.

I'm on my phone right now but will update the list when I get home.
 
Yob : 1
AJ80: 1
Rob.P: 2
Professional_Drunk: 1
Buckerooni: 1
Mardoo: 1
DU99 : 1
Danwood: 2
Idzy: 1
SimoB :1
CrookedFingers : 1
slcmorro: 1
Dips Me Lid : 1
Black n Tan: 1
CrazyOldGuy: 1
djar007: 1
Crouch: 2
mofox1: 1
Whiteferret: 2
Mall: 1
Roller997: 1
Longlostbelgian: 1
Fort Monty : 2
AndyD :1
MashBasher : 1
Prince Imperial: 1
Jack Truelove: 1
Porkchop: 1
WillCowan: 1
Sim76: 1
Syl: 2
Sim76: 2
Primusbrew: 1

Total: 40
 
Hey everyone. Well December has rolled around and I'm still not operational. So frustrating when relying on things things to happen that are beyond your control.
I am currently building the kiln and I really really hope to have it operational this month.
I'll post a couple of progress pics on my facebook page and on AHB as well in the next few days though so you'll be able to see things progressing.
I'm really excited to see it coming together as this is something that I have designed myself and having local guys that can build it is fantastic. It's really cool to see something take shape in the real world that you have only ever seen in CAD!
I'm really sorry for the delay (again) and I hope that everyone will stay as keen as I am to see this project finally get up and running.

Cheers!
 
Yep. I'm good. At waiting. And I'm really, really looking forward to getting stuck into this malt. The Schooner from the local mini bulk buy that happened is a delightful light malt, and I'm eager to give yours a brew too. Whenever.
 
Hey I know I'm late to the party, but great job getting this going, and I DEMAND a tour next time I'm down in Tassie.

If anyone loses patience or drops out of the buy for whatever reason, add me in for a bag.
 
Hey guys, getting back into the build now that the christmas break is over.
A few of the people that I have been using have been extra busy in the lead up to christmas which has delayed things again.
I guess it's a good sign that tradies in Tas are busy though yeah?

The kiln is both simple and complex at the same time.
It's basically a small room with a perforated floor that the grain sits in and hot air is blown through.
The heat exchanger is something of my of my own design and is being built in house.
All the steel plates in the photos have been laser cut locally by probably the coolest machine I have ever seen.
The guy fabricating this is a friend of mine that is also in the process of setting up his own workshop here in Launceston. He's a real gun and just knows how to get stuff done.
The gas fitter that is building the valve train and control system is also a local guy, based in the Tamar Valley. He is ridiculously knowledgeable and has been a huge help in the design process. This guy sits on the accreditation board for gas fitters in SA and works on all kinds of gas powered everything in the Asia Pacific region. Not bad for a Tasmanian.
So at this stage, I've got a mostly built heat exchanger, all the pieces for the kiln itself, a rather large pressure blower, a bunch of ducting and bits and I'm just waiting on the burner and control system to be finished so it can be bolted on.
Here is a couple pics from the heat exchanger build so far:




 
Very cool NFH! You've managed to level up on the stainless porn :icon_drool2:

PM me your address if you want me to send you that book I mentioned.
 
Uhhh still waiting on stuff to be built. The guy doing all my welding has been away on the west coast of Tas for most of January so that hasn't helped.
He is back on deck now though so the kiln will be built and operating this month hopefully.
I'll put some more photos up when we are in there building again.
 

Latest posts

Back
Top