Quantcast

Tesuco Dual Gauge Regulator

Aussie Home Brewer

Help Support Aussie Home Brewer:

Ryan WABC

Well-Known Member
Joined
30/6/11
Messages
101
Reaction score
1
Just got my first regulator in the mail and am wondering if perhaps it's missing an "O" Ring. Hoping someone with the same regulator can help me out.

I see there is a white "O" Ring on the gas-in side of the regulator, but on the gas-out side there are two pieces which form and attach the barb to the regulator without the use of an "O" Ring anywhere on that end. I may be being paranoid here, but I thought an "O" Ring might be needed to form a tighter seal. Haven't had a chance to test the reg out yet, and it does seem pretty air-tight, but hoping someone who has the same reg can help me out.

Cheers,

Ryan.
 

Crusty

The Electric Brewery
Joined
29/6/08
Messages
2,616
Reaction score
601
Location
Yamba, NSW
Just got my first regulator in the mail and am wondering if perhaps it's missing an "O" Ring. Hoping someone with the same regulator can help me out.

I see there is a white "O" Ring on the gas-in side of the regulator, but on the gas-out side there are two pieces which form and attach the barb to the regulator without the use of an "O" Ring anywhere on that end. I may be being paranoid here, but I thought an "O" Ring might be needed to form a tighter seal. Haven't had a chance to test the reg out yet, and it does seem pretty air-tight, but hoping someone who has the same reg can help me out.

Cheers,

Ryan.
I have the 3 gauge Tesuco regulator & the barbed outlets have no o rings.
They come without them & are not required.
Cheers
 

BJMetallica

Member
Joined
5/1/12
Messages
9
Reaction score
0

DU99

Well-Known Member
Joined
7/6/10
Messages
6,884
Reaction score
1,082
Location
Deer Park.Victoria
go to your nearest masters at nerang into the plumbing section and get a barb piece there.my CIG had no barb and the guys at masters helped me out
 

BJMetallica

Member
Joined
5/1/12
Messages
9
Reaction score
0
go to your nearest masters at nerang into the plumbing section and get a barb piece there.my CIG had no barb and the guys at masters helped me out

Thanks mate, appreciate it

BJ
 

Latest posts

Top