Star Shaped Keg Posts

Australia & New Zealand Homebrewing Forum

Help Support Australia & New Zealand Homebrewing Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

doon

Well-Known Member
Joined
9/9/08
Messages
1,097
Reaction score
117
what tool do you use to get these off? i have 3 kegs with one of these each on i dont seem to be able to get anything to fit them and get them off
 
what tool do you use to get these off? i have 3 kegs with one of these each on i dont seem to be able to get anything to fit them and get them off

A 7/8 ring spanner does the job

cheers

grant
 
sweet just found one at super cheap car store thanks guys
 
Asked the same question as well earlier! 7/8" Ring Spanners all round!
 
yeah I'd be using 22mm, 7/8 is too big. That said, the weird sized ones are the little ones and are 11/16"
 
Shouldn't it be Imperial, being American and all, rather than Metric? Or are the posts not American?
 
star shaped ring spanner, on the shelf next to left handed screwdriver's.
 
Its closer to the striped paint and the skyhook rack :)
 
Just before the long weight on the way out.
 
and don't forget to get a storeman's punch while you are there.
 
And you'll need a box of short circuits too, ask the bloke behind the counter for a bakers dozen.
 
and a can of spot welds wouldnt gp astray
 
Back
Top