Stainless Three Vessel HERMS & stand & heaps more

Australia & New Zealand Homebrewing Forum

Help Support Australia & New Zealand Homebrewing Forum:

fraser_john

Go Pies
Joined
17/1/06
Messages
2,477
Reaction score
374
Location
Victoria
  • All stainless & silicone tubing
  • Two stainless head pumps
  • Still Dragon heater element in kettle
  • Dual PID control one HERMS, one mash, cross linked by NC relay so that only one element runs at a time i.e. can run on a 10amp circuit!
  • Two power controllers, one for boil and another for a top up element
  • Stainless counter flow chiller
  • Stainless temperature probes & thermometers through out
  • Alloy stand
  • Two stage water filter (sediment and carbon)
All this for $600, my loss your gain, moving house soon and no longer brewing. NO SPLITTING NO QUIBLING, $600 is a steal for all these goodies, and there is more than I listed. More pics than I can upload!
 

Attachments

razz

Pro
Pro
Joined
30/10/05
Messages
3,380
Reaction score
361
Good to hear your still around FJ, nice set up. I hope you offload it ok. Good luck with the move.
 

Glenn Firns

Member
Joined
7/3/19
Messages
7
Reaction score
1
Location
Grovedale
  • All stainless & silicone tubing
  • Two stainless head pumps
  • Still Dragon heater element in kettle
  • Dual PID control one HERMS, one mash, cross linked by NC relay so that only one element runs at a time i.e. can run on a 10amp circuit!
  • Two power controllers, one for boil and another for a top up element
  • Stainless counter flow chiller
  • Stainless temperature probes & thermometers through out
  • Alloy stand
  • Two stage water filter (sediment and carbon)
All this for $600, my loss your gain, moving house soon and no longer brewing. NO SPLITTING NO QUIBLING, $600 is a steal for all these goodies, and there is more than I listed. More pics than I can upload!
Hi Mate where are you located please?
 

Glenn Firns

Member
Joined
7/3/19
Messages
7
Reaction score
1
Location
Grovedale
  • All stainless & silicone tubing
  • Two stainless head pumps
  • Still Dragon heater element in kettle
  • Dual PID control one HERMS, one mash, cross linked by NC relay so that only one element runs at a time i.e. can run on a 10amp circuit!
  • Two power controllers, one for boil and another for a top up element
  • Stainless counter flow chiller
  • Stainless temperature probes & thermometers through out
  • Alloy stand
  • Two stage water filter (sediment and carbon)
All this for $600, my loss your gain, moving house soon and no longer brewing. NO SPLITTING NO QUIBLING, $600 is a steal for all these goodies, and there is more than I listed. More pics than I can upload!
Hi Mate , can you call me on 0419 888816 . Thanks in advance.
 

Latest posts

Top