Quantcast

Stainless steel adapters

Aussie Home Brewer

Help Support Aussie Home Brewer:

Tahoose

Well-Known Member
Joined
22/9/13
Messages
1,455
Reaction score
498
Basically guys I'm after a shop which sells stainless steel nuts, bolts and adapters of different sizes.

At the moment I have a hole which is threaded and a male piece that screws into the hole which is around 10mm, on the end of this is a female thread for the same size.

I'm also have a female half inch ball lock post. And the aim is to screw this directly onto a 1/2 inch male thread. This will be the tap/out postfrom the stainless steel fermenter.

There are other ways to do it but if I just find the correct adapter this will be super simple.
 

barls

causer of chaos and mayhem
Joined
30/1/05
Messages
6,167
Reaction score
784
try your local engineering shop.
 

andrewl

Well-Known Member
Joined
21/11/05
Messages
252
Reaction score
3
T&S valves in sydney might have what you're after if you don't find anywhere closer to home.
 

Tahoose

Well-Known Member
Joined
22/9/13
Messages
1,455
Reaction score
498
Thanks for the suggestions guys, I'm sure I'll sort it out.
 

Truman42

Well-Known Member
Joined
31/7/11
Messages
3,966
Reaction score
605
Try Blackwoods. Also Keg King sell ball lock posts that go through bulkheads and have a male thread and nut on the other end which can be used to turn any sort of vessel into a pressurised keg fermenter etc.
 

jimmy_jangles

Well-Known Member
Joined
14/9/14
Messages
89
Reaction score
36
Location
Newcastle
i just sourced some stainless bsp gear from blackwoods on friday, if they can't help you then pirtek will for sure
 
Top