SST Pluto Gun - spare parts / seal

Australia & New Zealand Homebrewing Forum

Help Support Australia & New Zealand Homebrewing Forum:

Yuz

Well-Known Member
Joined
4/8/17
Messages
252
Reaction score
75
Location
Melb SE
After serving me many batches of brew, my Pluto gun has developed "incontinence" - pulled it apart for a clean, but no joy.
Is the nozzle seal (or the stem assembly) available as a spare part or can be replaced / repaired somehow?
Thanks :)
 

MHB

Well-Known Member
Joined
1/10/05
Messages
6,522
Reaction score
3,969
Location
Newcastle
Not sure which make you have but have found most of the guns parts are pretty interchangeable.
I always used this one from Andale. Most decent homebrew shops should be able to help you out with either a kit or just the tip washer if that’s all you want to change. I would do a pull-down, clean, grease, and re-kit.
Mark
1624542173227.png
 

Yuz

Well-Known Member
Joined
4/8/17
Messages
252
Reaction score
75
Location
Melb SE
Thanks Mark,

Forgot to mention - my Pluto is the one commonly available from KK / KL and resellers - "Premium Stainless Steel Pluto Gun". It's actually of really good quality and finish - it'd be disappointing if no spare parts are available.
I'll pull it apart again and see if the end seal / gasket is replaceable.

Cheers!
 
Top