Research And Advice Needed

Australia & New Zealand Homebrewing Forum

Help Support Australia & New Zealand Homebrewing Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

woodwormm

Well-Known Member
Joined
4/6/10
Messages
1,065
Reaction score
60
My current set up is brumby taps on a cheap chrome font.

I've purchased an Andale font (3 outlet) with the female section of snaploks on it.

I'm desperate for some Perlick forward sealing taps, as i'm very fed up with sticking brumby taps.

I'm struggling to find a definitive answer on what fittings are needed to join the two together.

IF i buy Perlicks from the states, do I then go to Andale with a 2nd mortgage and get the bits? or are they avail somewhere cheaper and friendlier (ie a sponsor)?

cheers
 
andales will have them, I think they call them "brumby tap adaptors" or something,

they fit my perlick 425s, IIRC they wer about $40e@

I couldn't find anything cheaper.

The guy at Semaphore HBS has allsortss of 2nd hand spares you could try him.

brauman59 on ebay is a good place for the perlicks

Cheers
 

Latest posts

Back
Top