Opening Celli Tap

Australia & New Zealand Homebrewing Forum

Help Support Australia & New Zealand Homebrewing Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

xternal

Member
Joined
12/12/06
Messages
9
Reaction score
0
How do I go about dismantling the Celli tap to get the main part out of it. I have got everthing else apart, except for the bit in the barrel with the big screw at the front.
Help appreciated as always! :)
 
The tap handle and flow controller mechanism need to be removed first, then it should come out with a little convincing.
Here's a pic of one of mine pulled apart:
ZdAAB.jpg
 
The tap handle and flow controller mechanism need to be removed first, then it should come out with a little convincing.
Here's a pic of one of mine pulled apart:
ZdAAB.jpg

Thanks for the reply, do i tap the screw at the front or do I push the other direction? dont want to damage anything.
 
Undo the screw at the front then push it out to the back.

BD
 
Undo the screw at the front then push it out to the back.

BD

Thanks, I figured out what I was doing wrong. I took the handle out before i undid the screw. The screw was stuck to the bit in the middle, so it was just turning round and round in the barrel.
 
Back
Top